You can fix the following issue in your phone:
1. Bootloop
2. Damaged System UI
3. TP Upgrade only
4. Dead phone but it is detected in computer
5. Remove Gmail Account / Password / Pattern Lock (Alternative Way)
"Download these files"
Firmware Here -->Cloudfone Excite 400dx
VCOM Driver -->VCOM Manual
Alternative Driver --> AutoInstaller
SPFlashTool --> LatestVersion
"Use WinRar or 7zip to extract the firmware"
"Extract the files to your desired folder"
"If you encounter error in flashtool, use different version of it."
"I suggest to use 32bit Windows OS for compatibility of the driver"
Installing Driver with AutoInstaller
First try the Alternative Driver, which is the AutoInstaller. Just open the install.exe then it will automatically install the driver. To fully check if the driver is correctly installed in your computer.
Follow these steps:
- Turn off your phone (always powered off is a must)
- Press and hold volume up or down, or you can simple press the two button
- Insert your USB cable without releasing the VOLUME button(s).
- In your computer, it must detect your phone and it will install the MTK Preloader or Mediatek USB VCOM driver.
- Repeat 1 to 4 if it does not detect your phone.
- If MTK Preloader/Mediatek USB VCOM Driver is installed you are good to go in flashing your phone ^_^
Reference Video using Driver Auto Installer (watch in HD)
Installing Manually using VCOM Driver
When
installing it manually your phone must be turned off, then connect it
to your computer/laptop while pressing VOLUME UP or VOLUME DOWN. This
will detect and look for the driver.
1. This is the first time that you will connect your phone and it will search for the correct driver.
2.
Check include this location ... ... and click on browse. Look for USB
VCOM Driver and Click on 2K_XP_COM folder if you are using Windows XP or
Win7 for Windows 7 and then press OK when you are done picking the
right folder for the driver.
3. If the driver is successfully installed MediaTek DA USB VCOM will appear in the New Hardware Wizard.
Video Installing VCOM Driver (please watch in HD)
"Your Phone must be turned off when you are ready to connect and flash your phone"
Flashing
1. Launch FlashTool (flash_tool.exe)
2. In Flashtool, Click on Scatter-Loading, and load your scatter file. (see example below)
Reference Video Using FlashTool version 5.xxx (watch in HD)
3. After you load the file, press Press Download to Flash your Phone.
4.
After you press Download Follow these steps
Some workarounds:
- Turn off your phone (always powered off is a must)
- Press and HOLD volume UP or Down or you can simply press it simultaneously
- Insert your USB cable without releasing the VOLUME button(s).
- Keep on repeating until Flashtool detected your phone.
"Hard reset your phone after flashing"
Some workarounds:
If you encounter PMT_Changed error here is what you do:
In Latest version of Flashtool
- Load the scatter file
- Choose Format all + Download (Underneath Scatter-loading file)
- Then Click Download and wait until it is done flashing
For Invalid IMEI:Your Phone/Tablet must be rooted first
Restore yong IMEI in MTKDroidTools version 2.5.3. You will have this error when you format your phone in Flashtool as I had experienced. To restore download MTKDroidTools version 2.5.3 After you extract the file. Open the green robot, you must enable the usb debugging in your phone. It is usually located in Settings>Devoloper Mode then look for usb debugging. After enabling it. Connect your phone in your computer then in MTKDroidTool click on ROOT. Wait for it to finish, then Click in IMEI/NVRAM, input 15 number in each box. Then click REPLACE. Then click Reboot or you can manually turn off your phone. Then turn your phone on again. You can see that you have fully restored your IMEI.
Restore yong IMEI in MTKDroidTools version 2.5.3. You will have this error when you format your phone in Flashtool as I had experienced. To restore download MTKDroidTools version 2.5.3 After you extract the file. Open the green robot, you must enable the usb debugging in your phone. It is usually located in Settings>Devoloper Mode then look for usb debugging. After enabling it. Connect your phone in your computer then in MTKDroidTool click on ROOT. Wait for it to finish, then Click in IMEI/NVRAM, input 15 number in each box. Then click REPLACE. Then click Reboot or you can manually turn off your phone. Then turn your phone on again. You can see that you have fully restored your IMEI.
I hope this tutorial help you. Please drop a comment if something is not clear to you.
pde po ba yan sa CLOUDFONE excite 402d? na boot loop kase ung saken
ReplyDeleteKung ano lang po yong title ng post na ito ay para lang po sa phone na ito.
ReplyDeleteBasisira po ang phone ninyo kapag tinesting niyo pa na iflash ang firmware na yan :)
san ko po mahahanap yung scatter ? thanks
ReplyDeletesa part ng pag ikinonek ko na yung phone ko habang nag hihintay yung flashtool, mag oopen ba yung phone ko ?
ReplyDeleteHi po,
ReplyDeleteDapat po hindi mag oon, wala po dapat display. Pag nag oon po, pacheck nalang po ng drivee kung nainstall ng mabuti.
Or pacgeck narin po ng usb port.
Mas ok din po na isaksak ang usb cable sa likod ng computer nyo.
Hello po.
ReplyDeletewindow 8 po yung gamit ko, nakakaapekto po ba yun.
nag chacharge lang po yung phone ko pag kinonek ko or napupunta sa recovery mode. paHelp po please.. Thanks
Ahh hindi naman yun nakakaapekto, baka po pala 64bit yang gamit mo po.
ReplyDeleteKug 64bit kailangan ioff mo muna yun driver signing or driver signature...
Sir MARAMING SALAMAT PO talaga dito.. ayos na po cp ko . back to zero nga lang.. pero ayos na to .. SALAMAT Po talaga .
ReplyDeleteWalang anuma po...
ReplyDeleteano po ba talaga yung unang gagawin, help po dku ka c ma download yung autoinstaller..
ReplyDeletepwd nyo po ba sabihin yung pagka ka sunod2 ng mga instruction, plz help po
Sunod sunod na po yan
ReplyDelete1. Download files
2. Install driver
3. Flash the phone.
Yan lang...
plz po gumawa kayu ng tutorial na kasama yung phone plzzzzz po plzzzzzzz
ReplyDeletesana mag reply po kaya, need lang talaga
ReplyDeletepaano po e off yung driver?
ReplyDeleteboss.. meron kbang guide gaya nito para sa excite 355g? paki up nmn kon meron.. salamat..
ReplyDeletepassword po sa cloudfone excite 400dx
ReplyDeletewalang password yan, mali ang nadownload mo po...
Deletecan i get the system ui of this rom? .. i want to replace the systemUI of my cloudfone excite 501o ,, yung G sa signal makes me irritated kc' ..
ReplyDelete