iTel A14 firmware/stock rom to unbrick your phone

Hi all,


This firmware is for iTel A14. The file is already converted to pac file. Make sure to use the latest Researchdownload Tool. Because this phone uses SPD7710E chip.

DOWNLOAD THE FILES, AND EXTRACT. INSTALL DRIVER.


TOOLS
ResearchDownload --> DOWNLOAD HERE
Firmware --> Download Here
SPD Driver --> Spreadtrum Driver

"Extract to your desired folders"  


I suggest to use Windows with 32bit system for better driver compatibility. But I also add  64bit driver.

TO fully flash your phone.
1. Open Researchdownload
2. Load packet and look for file the .pac file.(first button in ResearchDownload). Pac file is the firmware that you downloaded.
3. Wait until the Pac file has been loaded, the Researchdownload may freeze its ok just wait for it to load the pac file.
4.  Press the Play button to continue flashing.
When connecting your phone in the PC after you press the Play button in Research Download, press and hold either VOLUME UP or VOLUME DOWN, or you can press VOLUME UP and VOLUME DOWN simultaneously.

5. Just wait for it to show pass in ResearchDownload. Your phone will automatically reboot. And just wait for it. It may take 3 minutes to fully boot the system.

I hope this tutorial help you recover your phone :)