Cherry Mobile S2 firmware/stock rom to unbrick your tablet

Hi all,


This firmware is for Cherry Mobile Superion S2. The file is already converted to pac file. I have tried it one time and it is working...But make sure to back up your first if you have the tools to back. Just incase you encountered white screen problem.

Update - I encountered after I flash this firmware, the tablet is on reboot loop. So what i did is i go to recovery mode and i tried to wipe data.. And the tablet is on normal state.

ResearchDownload --> DOWNLOAD HERE
Firmware --> Download Here
SPD Driver --> Spreadtrum Driver

"Extract to your desired folders"  

DOWNLOAD THE FILES, AND EXTRACT. INSTALL DRIVER.

I suggest to use Windows with 32bit system for driver compatibility.

TO fully flash your phone.
1. Open Researchdownload
2. Load packet and look for file the .pac file.(first button in ResearchDownload). Pac file is the firmware that you downloaded.
3. Wait until the Pac file has been loaded, the Researchdownload may freeze its ok just wait for it to load the pac file.
4.  Press the Play button to continue flashing.
When connecting your phone in the PC after you press the Play button in Research Download, press and hold either VOLUME UP or VOLUME DOWN, or you can press VOLUME UP and VOLUME DOWN simultaneously.

5. Just wait for it to show pass in ResearchDownload. Your phone will automatically reboot. And just wait for it. It may take 3 minutes to fully boot the system.

I hope this tutorial help you recover your phone :)