Before you proceed flashing / hard resetting your phone / tablet make sure to back up your important files if possible. Because we care about your data.
We
also suggest that your battery should be atleast 50% or better to
have it fully charge, lower than the said value may cause unwanted
result, such as bricking your phone / tablet rendering it unuseable.
This is very important in flashing your phone / tablet. Use original
USB cable as possible.
Files
that you downloaded should not be corrupted, if ever the file is
corrupted you might brick your phone. Or the flashing will start.
Drivers
are very important specially in Spreadtrum Chipset, having an
Spreadtrum SPD6610 (non android devices) driver will not work in
SPD6820 (android devices).
If
you are using laptop to flash your phone, make your that it has
enough charge. If your laptop shutdown when your flashing your
phone/tablet, you'll end up bricking your phone. Sometimes you can
still recover your phone just flash it again and your phone will boot
up again. But that is just a case to case basis, if your phone /
tablet is deadboot (totally dead, erased all program in the
chip) you can't recover it, you will need to seek professional help
(technician).
This is the STOCK ROM for Lenovo S920. You can flash it via Smart Phone Flashtool.
Procedure:
1. Extract firmware to your desktop or anywhere else
2. Open Flash Tool & tick & select scatter file!
3. Tick download & Connect powered off unit to usb cable by pressing volume up or down, you can also press it simultaneously
4. Press Download Button
5. Wait until finish downloading!
6. Dont forget to tick DA DL ALL With Check Sum
If you have problem with the driver. Install PDANet for MTK Driver. Link for the driver is given below
You can download it here.
Google Download Link
Sendspace Download Link
No comments:
Post a Comment