Monday, July 28, 2014

MyPhone Fuego Ignite Flash File, Firmware

Before you proceed flashing / hard resetting your phone / tablet make sure to back up your important files if possible. Because we care about your data.


We also suggest that your battery should be atleast 50% or better to have it fully charge, lower than the said value may cause unwanted result, such as bricking your phone / tablet rendering it unuseable. This is very important in flashing your phone / tablet. Use original USB cable as possible.

Files that you downloaded should not be corrupted, if ever the file is corrupted you might brick your phone. Or the flashing will start.

Drivers are very important specially in Spreadtrum Chipset, having an Spreadtrum SPD6610 (non android devices) driver will not work in SPD6820 (android devices).

If you are using laptop to flash your phone, make your that it has enough charge. If your laptop shutdown when your flashing your phone/tablet, you'll end up bricking your phone. Sometimes you can still recover your phone just flash it again and your phone will boot up again. But that is just a case to case basis, if your phone / tablet is deadboot (totally dead,  erased all program in the chip) you can't recover it, you will need to seek professional help (technician).


You can use this flash file in GPG Dragon, Volcano Box, Miracle Box and other box that support .bin format. This phone uses MTK 6260 chipset.








You can download the file below.

Download Here

0 comments:

Post a Comment

 

Subscribe to our Newsletter

Contact our Support

Email us: gadgetzboyz@gmail.com

Our Team Memebers