Just Another Gadget Blog

Breaking

Friday, December 19, 2014

Huawei Y511 stock rom / firmware to unbrick your phone

For those who are looking for the stock ROM of Huawei Y511 this is the file that you are looking for. This is flashable via Flashtool.



 


You can fix the following issue in your phone:
1. Bootloop
2. Damaged System UI
3. TP Upgrade only
4. Dead phone but it is detected in computer
5. Remove Gmail Account / Password / Pattern Lock (Alternative Way)

"Download these files"  
Firmware Here -->Huawei Y511
VCOM Driver -->VCOM Manual
Alternative Driver --> AutoInstaller
SPFlashTool --> LatestVersion 


"Use WinRar or 7zip to extract the firmware"
"Extract the files to your desired folder"
"If you encounter error in flashtool, use different version of it."

"I suggest to use 32bit Windows OS for compatibility of the driver"


Installing Driver with AutoInstaller


First try the Alternative Driver, which is the AutoInstaller. Just open the install.exe then it will automatically install the driver. To fully check if the driver is correctly installed in your computer. 

Follow these steps:
  1. Turn off your phone (always powered off is a must)
  2. Press and hold volume up or down, or you can simple press the two button
  3. Insert your USB cable without releasing the VOLUME button(s).
  4. In your computer, it must detect your phone and it will install the MTK Preloader or Mediatek USB VCOM driver.
  5. Repeat 1 to 4 if it does not detect your phone.
  6. If MTK Preloader/Mediatek USB VCOM Driver is installed you are good to go in flashing your phone ^_^


Reference Video using Driver Auto Installer (watch in HD)

Installing Manually using VCOM Driver

When installing it manually your phone must be turned off, then connect it to your computer/laptop while pressing VOLUME UP or VOLUME DOWN. This will detect and look for the driver.


 1. This is the first time that you will connect your phone and it will search for the correct driver.

2. Check include this location ... ... and click on browse. Look for USB VCOM Driver and Click on 2K_XP_COM folder if you are using Windows XP or Win7 for Windows 7 and then press OK when you are done picking the right folder for the driver.


3. If the driver is successfully installed MediaTek DA USB VCOM will appear in the New Hardware Wizard.

Video Installing VCOM Driver (please watch in HD)




"Your Phone must be turned off when you are ready to connect and flash your phone"

Flashing Procedure
1. Launch FlashTool (flash_tool.exe)
2. In Flashtool, Click on Scatter-Loading, and load your scatter file. (see example below)

Reference Video Using FlashTool version 5.xxx (watch in HD)

 3. After you load the file, press Press Download to Flash your Phone.

4. After you press Download Follow these steps
  • Turn off your phone (always powered off is a must)
  • Press and HOLD volume UP or Down or you can simply press it simultaneously
  • Insert your USB cable without releasing the VOLUME button(s).
  • Keep on repeating until Flashtool detected your phone.
5. If successfully detected just wait until the progress bar reaches 100%. If your phone did not automatically turn on after flashing, remove battery and USB cable. And put back your battery then turn on your device.


"Hard reset your phone after flashing"


Some workarounds:
If you encounter PMT_Changed error here is what you do:
In Latest version of Flashtool
  1. Load the scatter file
  2. Choose Format all + Download (Underneath Scatter-loading file)
  3. Then Click Download and wait until it is done flashing
For Invalid IMEI:Your Phone/Tablet must be rooted first
Restore yong IMEI in MTKDroidTools version 2.5.3. You will have this error when you format your phone in Flashtool as I had experienced. To restore download MTKDroidTools version 2.5.3 After you extract the file. Open the green robot, you must enable the usb debugging in your phone. It is usually located in Settings>Devoloper Mode then look for usb debugging. After enabling it. Connect your phone in your computer then in MTKDroidTool click on ROOT. Wait for it to finish, then Click in IMEI/NVRAM, input 15 number in each box. Then click REPLACE. Then click Reboot or you can manually turn off your phone. Then turn your phone on again. You can see that you have fully restored your IMEI.


I hope this tutorial help you. Please drop a comment if something is not clear to you.

20 comments:

  1. Hi. This firmware unbriked my Huawei, but this firmware is for y511-u30. Do you have firmware for u10(single sim)?

    ReplyDelete
  2. Thanks a lot.. 100% workig. keep it up

    ReplyDelete
  3. Great! did bring back to life my phone with this tuts..Many Thanks!
    anyway...i sent friend request in ur FB hope its right :-D 'Maribel Nuarin'

    JabBless!! Uragon Reprezent!!

    ReplyDelete
  4. I have a problem
    The phone does not work completely, I tried several times, tried more than one copy of "Firmware" but not succeed.
    When I chose "Upgrade" error message appears "Failed to get PMT info"
    When I chose "Download Only or Formate all + Download" error message appears "BROM_ERROR: ?? (8)"
    all this message appears When the tape to reach Download Boot Loader %100
    I want to know what are the exact problem and how to solve them
    Thank you for helping me, I'm Tired looking for a solution for months

    ReplyDelete
    Replies
    1. ser . have you tried the older version of spflashtool ? .. try it and you will see :)) i works , haha .. na encounter ko na to sa o+8.92 ko .. buti may nabasa ako na gagana yung older version ng spft .. nagtry ako ayun gumana :)

      Delete
  5. ayos gumana .. pero not working sa updated na spflashtool ..laging PMT changed error .. gamit lang kayo ng V3 .. haha salamat dito ok na unit ko :))

    ReplyDelete
  6. is this firmware network unlocked?

    ReplyDelete
  7. will this work on huawei y511-u10?

    ReplyDelete
  8. 100% workin fimware thanks you.


    ReplyDelete
  9. Sor pwede po makahingi ng firmware :( need lang po

    ReplyDelete
  10. Mga sir/mam pwede mu makhingi ng firmware :(

    ReplyDelete
  11. huawei y5 cun L02 firmware brad la ako mahanap meron ka po ba

    ReplyDelete

Pages