Sunday, January 25, 2015

Cherry Mobile Amethyst Stock Rom / firmware to unbrick your phone

This firmware is for Cherry Mobile Amethyst. You can download it below. I also have a tutorial that you can follow. Just understand and read it carefully. Videos and pictures are just example but the procedure is still the same.


You can fix the following issue in your phone:

1. Bootloop
2. Damaged System UI
3. TP Upgrade only
4. Dead phone but it is detected in computer
5. Remove Gmail Account / Password / Pattern Lock (Alternative Way)
6. And other issues with your phones firmware

"DOWNLOAD THESE FILES"
Firmware Here -->Cherry Mobile Amethyst

VCOM Driver -->VCOM Manual
Alternative Driver --> AutoInstaller
SPFlashTool --> LatestVersion 


"Use WinRar or 7zip to extract the firmware"
"Extract the files to your desired folder" See picture below"
"If you encounter error in flashtool, use different version of it."

"I suggest to use 32bit Windows OS for compatibility of the driver"


Installing Driver with AutoInstaller


First try the Alternative Driver, which is the AutoInstaller. Just open the install.exe then it will automatically install the driver. To fully check if the driver is correctly installed in your computer. 

Follow these steps:
  1. Turn off your phone (always powered off is a must)
  2. Press and hold volume up or down, or you can simple press the two button
  3. Insert your USB cable without releasing the VOLUME button(s).
  4. In your computer, it must detect your phone and it will install the MTK Preloader or Mediatek USB VCOM driver.
  5. Repeat 1 to 4 if it does not detect your phone.
  6. If MTK Preloader/Mediatek USB VCOM Driver is installed you are good to go in flashing your phone ^_^


Reference Video using Driver Auto Installer (watch in HD)

Installing Manually using VCOM Driver

When installing it manually your phone must be turned off, then connect it to your computer/laptop while pressing VOLUME UP or VOLUME DOWN. This will detect and look for the driver.


 1. This is the first time that you will connect your phone and it will search for the correct driver.

2. Check include this location ... ... and click on browse. Look for USB VCOM Driver and Click on 2K_XP_COM folder if you are using Windows XP or Win7 for Windows 7 and then press OK when you are done picking the right folder for the driver.


3. If the driver is successfully installed MediaTek DA USB VCOM will appear in the New Hardware Wizard.

Video Installing VCOM Driver (please watch in HD)




"Your Phone must be turned off when you are ready to connect and flash your phone"

Flashing
1. Launch FlashTool
2. In Flashtool, Click on Scatter-Loading, and load your scatter file. (see example below)

Reference Video Using FlashTool version 5.xxx (watch in HD)

 3. After you load the file, press Press Download to Flash your Phone.

4. After you press Download Follow these steps
  • Turn off your phone (always powered off is a must)
  • Press and HOLD volume UP or Down or you can simply press it simultaneously
  • Insert your USB cable without releasing the VOLUME button(s).
  • Keep on repeating until Flashtool detected your phone.
5. If successfully detected just wait until the progress bar reaches 100%. If your phone did not automatically turn on after flashing, remove battery and USB cable. And put back your battery then turn on your device.


"Hard reset your phone after flashing"


Some workarounds:
If you encounter PMT_Changed error here is what you do:
In Latest version of Flashtool
  1. Load the scatter file
  2. Choose Format all + Download (Underneath Scatter-loading file)
  3. Then Click Download and wait until it is done flashing
For Invalid IMEI:Your Phone/Tablet must be rooted first
Restore yong IMEI in MTKDroidTools version 2.5.3. You will have this error when you format your phone in Flashtool as I had experienced. To restore download MTKDroidTools version 2.5.3 After you extract the file. Open the green robot, you must enable the usb debugging in your phone. It is usually located in Settings>Devoloper Mode then look for usb debugging. After enabling it. Connect your phone in your computer then in MTKDroidTool click on ROOT. Wait for it to finish, then Click in IMEI/NVRAM, input 15 number in each box. Then click REPLACE. Then click Reboot or you can manually turn off your phone. Then turn your phone on again. You can see that you have fully restored your IMEI.


I hope this tutorial help you. Please drop a comment if something is not clear to you.

26 comments:

  1. Thanks po sa blog nato narecovery ko na cherry mobile amethyst ko from factory mode and bootloop maraming salamat po!!! Gusto ko po mag install ng new custom rom sa amethyst ko sana matulungan nyo pa ako.

    ReplyDelete
    Replies
    1. talaga bang lalabas yung factory mode kapag naipress mo yung down button at isinaksak mo yung usb?

      Delete
  2. salamat sa feedback po. wala po ako custom rom eh. try ka nalang po sa ibang site :-)

    ReplyDelete
    Replies
    1. sir talaga po bang lalabas yung factory mode kapag

      Delete
  3. Gud day! Ask ko lng po ? Nun na bootloop amethyst ko rooted po ako nun "supersu" then follow po ako sa step nyo narecover napo un amethyst ko pero may new app po na pumasok"kinguser" means po ba rooted pa din ako at pwede ko na uninstall yun supersu? Kasi po nid pa update un supersu

    ReplyDelete
  4. Ahh opo yong Kinguser eh meaning rooted ka na po niyan.


    Pwede niyo narin po alisin ang supersu.

    ReplyDelete
  5. nag failed palagi sa akin

    ReplyDelete
  6. baka po lowbat yung battery niyo

    ReplyDelete
  7. nag flash po sakin pero ayaw pa rin mabuhay ng phone ko,,panu po ba gagawin tnx

    ReplyDelete
  8. Try niyo po format niyo muna sa format tab, tapos flash niyo ulit. Download only

    ReplyDelete
  9. sir gud day po ganun pa rin po eh kahit naformat ko n po tas reflash stock p rin po sa android logo eh!!

    ReplyDelete
  10. Nag hard reset ka po pagkatapos.?

    ReplyDelete
  11. Mag hard reset ka po, ang pag hard reset niyan kagaya sa cherry mobile garnet.

    Search mo yung post ko ng cherry mobile garnet..

    ReplyDelete
  12. sir ayaw p rin po stock prin po sya logo

    ReplyDelete
  13. Try mo ulit iformat sa flashtool at idownload ang firmware, pagkatapos hard reset ka na ulit...

    ReplyDelete
  14. John Denver LazaroMay 18, 2015 at 7:30 PM

    sir panu ko malalaman kung nadetect na phone ko?

    ReplyDelete
  15. san makukuha ung scatter file???
    walng lumalabas sa flash tool

    ReplyDelete
  16. pwede po ba to ma flash windows8.1?

    ReplyDelete
  17. Pwede po ba kayo maglagay ng download link ng scatter file ng CM amethyst? Kasi po I accidentally delete this file and wala po cya sa recycle bin...please lang po, kailangang-kailangan ko po talaga to... thank you ;-)

    ReplyDelete
    Replies
    1. Di niyo binasa sa taas meron na link dyan...

      Sa download these files po...

      -Admin John

      Delete
  18. BAKIT AYAW DRAM - ERROR FUCK -,-

    ReplyDelete
  19. This is awesome, Thank you. Ayos na ang CP ko.

    ReplyDelete
  20. wla po bang nakakaalam kasi di na nag chacharge phone ko ?? pag katapos ko flash .

    ReplyDelete

 

Subscribe to our Newsletter

Contact our Support

Email us: gadgetzboyz@gmail.com

Our Team Memebers