Just Another Gadget Blog

Breaking

Sunday, March 8, 2015

MyPhone Rio Fun V2 MTK6571 firmware/stock rom to unbrick your phone

Hi,


Update: Although this firmware is intended for MyPhone Rio Fun V2, with software version S5202Ap_KK_Agua_Rio_Fun_20140910_1.09 (as shown in my photo that I took below) there's still a possibility that you might brick your phone. As I have said below, I only tried this firmware once with Privacy Password Lock problem. And the procedure that I use is below, and it worked for me. I am not really sure what happened to other MyPhone Rio Fun users that flashed this firmware.


!!!So please flash at your own risk.!!!



Update 2:  I was able to fixed another phone with this firmware. The problem of the phone was I was expanding the storage via Link2SD and I accidentally erased an important file. So what I did is I restored the back up via TWRP, but I cannot restore because of mismatch md5 checksum. So tweaked the back up files. And restore again. And BOOM! I bricked the phone. So my last resort was to flash this firmware. I also experience the 4% of death. I tried to firmware upgrade first and It successfully flashed but the phone is in boot loop state.So I flashed it again (Download Only) and it finally boot up properly...

This firmware is for MyPhone Agua Rio Fun V2 or board Version 2 for MTK6571. I have tried this firmware in a phone with Privacy Password.


Please follow my guide carefully, because you might brick your phone. You might experience the 4% of death when you are trying to flash your phone.


The firmware is not rooted. If you want to root this phone you can use Kingroot. 

The software version of this firmware is version 1.09. Please check your software version in factory mode (PRESS AND HOLD VOLUME UP + DOWN + POWER BUTTON) Then go to test item, then select the first item.




You can fix the following issue in your phone:
1. Bootloop
2. Damaged System UI
3. TP Upgrade only
4. Dead phone but it is detected in computer
5. Remove Gmail Account / Password / Pattern Lock (Alternative Way)
6. Privacy Protection Password Lock up


"DOWNLOAD THESE FILES"
Firmware Here -->MyPhone Agua Rio Fun Kitkat MTK6571
VCOM Driver -->VCOM Manual
Alternative Driver --> AutoInstaller
SPFlashTool --> LatestVersion 


"Use WinRar or 7zip to extract the firmware"
"Extract the files to your desired folder"
"If you encounter error in flashtool, use different version of it."


"I suggest to use 32bit Windows OS for compatibility of the driver"



Installing Driver with AutoInstaller

First try the Alternative Driver, which is the AutoInstaller. Just open the install.exe then it will automatically install the driver. To fully check if the driver is correctly installed in your computer. 

Follow these steps:
  1. Turn off your phone (always powered off is a must)
  2. Press and hold volume up or down, or you can simple press the two button.
  3. Insert your USB cable without releasing the VOLUME button(s).
  4. In your computer, it must detect your phone and it will install the MTK Preloader or Mediatek USB VCOM driver.
  5. Repeat 1 to 4 if it does not detect your phone.
  6. If MTK Preloader/Mediatek USB VCOM Driver is installed you are good to go in flashing your phone ^_^

Reference Video using Driver Auto Installer (watch in HD)


Installing Manually using VCOM Driver


When installing it manually your phone must be turned off, then connect it to your computer/laptop while pressing VOLUME UP or VOLUME DOWN. This will detect and look for the driver.


 1. This is the first time that you will connect your phone and it will search for the correct driver.

2. Check include this location ... ... and click on browse. Look for USB VCOM Driver and Click on 2K_XP_COM folder if you are using Windows XP or Win7 for Windows 7 and then press OK when you are done picking the right folder for the driver.


3. If the driver is successfully installed MediaTek DA USB VCOM will appear in the New Hardware Wizard.

Video Installing VCOM Driver (please watch in HD)





"Your Phone must be turned off when you are ready to connect and flash your phone"

Flashing
1. Launch FlashTool (flash_tool.exe)
2. In Flashtool, Click on Scatter-Loading, and load your scatter file. (see example below)

Reference Video Using FlashTool version 5.xxx (watch in HD)



 3. After you load the file, UNCHECK PRELOADER only, press Press Download to Flash your Phone.


4. After you press Download Follow these steps
  • Turn off your phone (always powered off is a must)
  • Press and HOLD volume UP or Down or you can simply press it simultaneously
  • Insert your USB cable without releasing the VOLUME button(s).
  • Keep on repeating until Flashtool detected your phone.
5. If successfully detected just wait until the progress bar reaches 100%. If your phone did not automatically turn on after flashing, remove battery and USB cable. And put back your battery then turn on your device.




"Hard reset your phone after flashing"


Some workarounds:
If you encounter PMT_Changed error here is what you do:
In Latest version of Flashtool

PMT_CHANGED error occur when firmware is not compatible with your phone. Sometimes your phone has a different board version. You should check it too, if your firmware is compatible with your phone.  

If you encounter Privacy Protection Password:

  1. Open flash_tool.exe
  2. Load the scatter file
  3. Goto Format Tab
  4. Click on Format except bootloader
  5. Press Play/Start Icon
  6. Then remove battery
  7. Insert the battery again
  8. Insert the USB cable (you should hear a beep on your computer, and it should proceed in formatting.)
  9. After done formatting proceed in Flashing.
  10. Goto Download tab (I assume that you loaded the scatter file already)
  11. Uncheck PRELOADER (this is very important)
  12. Press Download
  13. Then remove battery
  14. Insert Battery again
  15. Insert the USB cable (you should hear a beep on your computer, and it should proceed in flashing or downloading the firmware in your phone.)
  16. Power ON the phone after flashing.
  17. Restore your IMEI.


For Invalid IMEI:Your Phone/Tablet must be rooted first
Restore yong IMEI in MTKDroidTools version 2.5.3. You will have this error when you format your phone in Flashtool as I had experienced. To restore download MTKDroidTools version 2.5.3 After you extract the file. Open the green robot, you must enable the usb debugging in your phone. It is usually located in Settings>Devoloper Mode then look for usb debugging. After enabling it. Connect your phone in your computer then in MTKDroidTool click on ROOT. Wait for it to finish, then Click in IMEI/NVRAM, input 15 number in each box. Then click REPLACE. Then click Reboot or you can manually turn off your phone. Then turn your phone on again. You can see that you have fully restored your IMEI. 




FOR DAMAGED BASEBAND or UNKNOWN BASEBAND (Your phone must be rooted first)

1. Make sure you have MTKDROIDSTOOL version 2.4.8 or version 2.5.3 (you can search it in google)

2.  In MTKDroidstool (I assume you launch the tool) -- Click in Root. 
3. In your device -- After you press Root, you need to authorize it. A pop up message will appear. Click Allow/Authorize depends on your root application.
4. In MTKDroidsTool -- Click in IMEI/NVRAM, then click in RESTORE.
5. Then look for the folder where you extracted the NVRAM files.
6. Check if the Baseband is fixed. And if the IMEI is fully restored.
7. If Baseband is still Unknown and IMEI is invalid. Then you need to hard reset first your phone.
8. After hard reset your baseband should be fixed already. (base on my experience)
9. If your baseband is fixed sometimes the IMEI is still invalid. So you need to restore the IMEI.
10.  To restore IMEI follow Step 1-4, but you should not restore. You should fill the IMEI then click REPLACE. Then reboot your phone.  VOILA! I hope the phone is fully working :)

I hope this tutorial help you. Please drop a comment if something is not clear to you.

Tested by:
Me - Files / Flashing / Privacy Protection Password

I would like to give credits to those who uploaded the file online.

180 comments:

  1. idol nakita kuna forum try ko muna ito baka dito magising yung natutulog na cp ko

    ReplyDelete
  2. ok ano ba sira ng phone mo dati?

    ReplyDelete
  3. gud am Idol na memory test kuna yung myphone ok naman sa nand,ram pero pinag tataka ko yung EMMC not detected,anu kaya ibig sabihin nun? upload ko picture dun sa mga ginagawa ko procedure para mabigyan u me opinion kung anu talaga sira.

    ReplyDelete
  4. idol baka V1 yang phone mo.??

    ReplyDelete
  5. naka lagay sa likod v2 cya idol cge try ko din v1 muna di ko muna binubusan unit para makita chips sa loob eh pero try ko muna down load ng pang version 1 pa link naman kung meron u tnx

    ReplyDelete
  6. yung nasa picture na about phone ganun na ganun nakalagay pati custom rom nya pareho lang

    ReplyDelete
  7. ah wag mo na idownload version 2 naman pala...

    ReplyDelete
  8. baka kailangan i repair ng may mga box tulad ng volcano box or any brand diba?

    ReplyDelete
  9. any idea idol kung anung dapat gawin na?

    ReplyDelete
  10. try mo po ipo iphysical format/readback sa advance mo po ng flashtool

    ReplyDelete
  11. sa latest na flash tools ba idol?or puwede din sa new version na dl ko sa forum u?

    ReplyDelete
  12. ayaw talaga tumuloy sa format idol sa readback lang,kasi pag bootloader na iload sabi too many bad blocks daw sabi kaya di ma download bootloader nya,panu kaya yun idol,last option mo idol?

    ReplyDelete
  13. idol A1-810 may frimware ako kaya lang ung sakit ng tablet hang sa erasing android

    ReplyDelete
  14. baka may solution ka dito bago i flash

    ReplyDelete
  15. mt6589 scatter file nya,di ko ma backup ayyaw talaga

    ReplyDelete
  16. mga guru, try ko mag flash following the steps, kaso nag eerror ako
    brom error : s_ft_need_download_all_fail (4014) fail to download images to nand flash
    Help naman :)

    ReplyDelete
  17. hi po, pinag uncheck niyo po ba yung preloader? ano po paa ang problema ng phone niyo?

    br,
    John

    ReplyDelete
  18. Ni reformat ko ulit, then uncheck preloader. After nun pag download na yan na yung error.

    ReplyDelete
  19. Sa ngayon ayaw na nya mag on and pag nagcha charge hindi na rin makita na charging. huhuhu

    ReplyDelete
  20. Meron pa kaya makaka tulong sa akin dito :) HELP

    ReplyDelete
  21. sir pa try po ng settings sa flash tool, format all+download.

    ReplyDelete
  22. eto na po ba un?sir

    ReplyDelete
  23. eto na nga po, pero isearch mo sa taas yung unit mo po..

    ReplyDelete
    Replies
    1. sir john pa help naman po kasi sa myphone agua ko my lumalabas na UNFORTUNATELY MEASURE HAS STOPPED and SECURITY PLUGIN? anu po ba dapat kong gawin sir!! help naman po thanks

      Delete
  24. Thanks sa reply, Nag try ko na format all + Download. Same error pa rin Failed to download images to nand flash

    ReplyDelete
  25. patry po nito last option.


    open sp flash tool

    then control alt v to enter advance mode

    click format

    select whole flash and forcedly erase

    enter option, select download menu,, select physical format/readback then close this window, click start button then connect usb to your phone.

    wait until format is done..

    then load scatter file then click download, connect usb to your phone

    ReplyDelete
  26. Nagtuloy na yung downloading 100% na. Ang prob ko na lang is after downloading ayaw pa rin mag ON yung cp. I think malapit na to :) Any additional advice?

    ReplyDelete
  27. Charge u lang pang tablet na charger pag nag on saka u ilipat sa charger nya .ok

    ReplyDelete
  28. Ganyan din nangyqri sa cp ko so huwag mawalan ng pag asa full download na yan kaya kailangan i shock u para magising

    ReplyDelete
  29. May masusuggest pa ba kayo?? Sa ngayon nagtuloy na ng 100% yung flash, Pero ayaw pa rin mag charge or mag ON yung CP.. Thanks

    ReplyDelete
  30. sir try niyo firmware upgrade...

    ReplyDelete
  31. Na try ko na firmware upgrade. Nag successful naman pero hindi pa rin mag power ON yung cp

    ReplyDelete
  32. anong software version niyan dati/ baka 1.08...

    ReplyDelete
  33. hi Yan ang hindi ko alam, Kasi hindi na sya nag oON so possible din na 1.08 nga. nag try ako ng ibang Stock rom, chipset incompatible naman, Ang nagtutuloy lang yung nadownload dito

    ReplyDelete
  34. bro bigyan u lang mataas na miliamp na charger tapos plug in mo den hayaan u lang at mag bubulkas yan pag nag bukas charge u uli sa dati nyang charger,ok sana makatulong,ganyan din nanyari sa cp ko agua fun v2.

    ReplyDelete
  35. Hi Bro, cjarger kaya ng IPAD. pwede kaya yun? Hindi kaya masira?

    ReplyDelete
  36. bro ika nga sa sasakyan jag lang para mabuhay tapos pag nakita u na charging icon saka u ilipat ung sa original charger nya okk

    ReplyDelete
  37. Nagtry ako ng tablet charget. Ayaw talaga mabuhay. Angbhope oo na lang na maayos to eh dahil nadedetect pa sya ng pc. Help!!!

    ReplyDelete
  38. Sir may nahanap ako na version 1.08 pa try nalang po baka pwede dyan
    http://www.4shared.com/rar/jC5_wd-Lba/My_Phone_Agua_Rio_Fun_v2_by_da.html?

    ReplyDelete
  39. Hi John, Ndownload ko na yung File. Natry ko na mag Format+Download/ Download / Firmware upgrade. Ayaw pa rin mag charge and mag On ng CP ko kahit 100% complete ang lahat. Ang weird naman ng MP Rio Fun v2 :) Baka may masusuggest pa kayo :)

    ReplyDelete
  40. try niyo po format whole flash sa format tab po then, download niyo ulit firmware.

    ReplyDelete
  41. kung magDRAM_FAIL may ipapagawa akosainyo. reply lang po kayo :-)

    ReplyDelete
  42. Hindi sya nag dram fail,,... Saka nag try na rin ako ng format tab then download. Baka nga may Tama na. wala na ba hope?

    ReplyDelete
  43. nagformat whole flash kana po?


    ipagreheat mo sa technician ang pyesa...alam na yan ng technician :-)

    ReplyDelete
  44. after po lumabas ung download ok binalik q ung battery pero d nag open then connect ko yung charger, hnd n din nagcharge. pls help

    ReplyDelete
  45. ganyan din po nangyari sa cp q ayaw din mag on at magcharge :(

    ReplyDelete
  46. Prince KAtz Dayondon AquitMarch 23, 2015 at 8:23 PM

    baka kagaya yan nang sakin v2 ang nasa likod nang cover pero v1 sa loob nang chip., guysz pa link nang v1 please :) kailagan nang cp ko rin eh

    ReplyDelete
  47. Pa search nalang po sa search tab dito sa blog ko po, ang title rio fun stock rom

    ReplyDelete
  48. Ewan ko ba sa phone na ito. Pag itong phone ang ginagawa ko kinakabahan din ako mag reflash...

    Nachambahan ko nga lang yung nagpaprivacy password lock.

    ReplyDelete
  49. Pag DRAM Fail ano gagawin?

    ReplyDelete
  50. Gamit ka version 3.1344, yan ginawa ko last time sa rio fun. Biglang nagpower on yung CP

    ReplyDelete
  51. Rodny Lomonsod GenonMarch 26, 2015 at 9:11 AM

    Ayaw na ma detect ng PC ang phone ko :3

    ReplyDelete
  52. bro jr try u lang huwag mawalan pag asa pag nag bukas na cp mo may user data ako back up para bumalil imei mo at walang error sa nvram u juat try lang mga frimware ok

    ReplyDelete
  53. Hi po,

    Patry nalang ulit...

    Ano po pala sira ng phone mo po?

    ReplyDelete
  54. anong version 3.1344? SPFT?

    ReplyDelete
  55. may mali ata sa instruction dto sinunod ko yung instruction parehas ngyari kay jrconrado

    ReplyDelete
  56. i suggest na ipagawa nlng ang phone sa repair shop dpat ireklamo sa dti tong myphone nagpalit lng sim nalock na yung phone sa privacy password

    ReplyDelete
  57. Good Day admin, na try ko na rin tong method mo just to remove the annoying privacy lock ng phone, kasi anjan pa din ung lock after mag hard reset.

    Kaso ang nangyari, nag stock sa 4% ung pag flash at ngayon ay ayaw na mag on at makita ang charging..

    Salamat sir.

    ReplyDelete
  58. dont try this po kung cno man ang ngbabasa dto mbbrick and phone mo

    ReplyDelete
  59. na brick nga ung phone, sayang, pinaayos lang naman sa akin. pero kudos pa rin sa effort nung nag post. Di lang talaga natin alam kung paanong paraan niya sinunod ang method na ito at naging successful sa kanya..

    ReplyDelete
  60. Mga kasama pag tulungan nalang natin kung paano natin magagawa phone like sa akin 5 tech na timingin pero kalaunan ako din ang naka gawa upload ko ung dowload link sa 4 shared ko para madownload nyo yung ginamit ko na frimware at flasher ok po stay foot lang maayos din yan same procedure ang gagawin natin.ok po

    ReplyDelete
  61. sige po, salamat. aabangan natin. pati method niyo, pa share na lang din. salamat ^_^

    ReplyDelete
  62. Same method parin tayo den pag natapos yun talagang mangyayari di nyo ma open kaya pag na tapos po at 100℅ ang download sa flasher kailangan charge muna agad na charger 700miliampere na charger,konting observation lang po at huwag lang maiinip.upload ko lang po sa 4shared ung ginamit ko at ibibigay ko yung link without pasword po tnx

    ReplyDelete
  63. May mga naayus din naman at nagfailed pero un naman ay dipende sa tiyaga at sa diskarte nang gumagawa etong forum na ito ay bigayan opinion at karanasan sa pag gawa ng anu mang klase ng cellphone or tablet.kaya sa pamagitan ng bigayan ng opinion at karanasan nabubuo sa isipan ang mga diskarte,dipende nalang dun sa gagawa,kailangan din po natin mag isip kung bakit?or anung paraan para maayos ang isang bagay.slamat po

    ReplyDelete
  64. Hi po,

    Thanks sa pag bahagi ng experience niyo.

    Ganun din po ba ang software version niyo sa taas? Bago kayo nagflash?

    ReplyDelete
  65. Na experince ko rin yan po, nagpalit at nagroot lang ako tapos nagkaprivacy lock na po..

    Kaya yan ang ginawa ko sa taas.

    ReplyDelete
  66. Salamat sa pagbabahagi ng iyong kaalaman po.

    ReplyDelete
  67. yup v2, nkalagay sa likod ng unit. Ang problem lang ay ung auto privacy lock na feature ng phone na ito eh at di matanggal ng simpleng factory reset. napasubo tuloy ako mag spft.

    ReplyDelete
  68. Sa totoo lang napakahirap ng rio fun, rio craze, rio junior, rio junior tv gawin. Kasi karamihan namamatay kapag nagflash ka.

    ReplyDelete
  69. Hindi po yung software version po ang tinutukoy ko.

    ReplyDelete
  70. Hindi ko na po sure ung software version nito, kasi di ko na ma open ung phone nung na lock na. So naghanap na lang ako sa phone para ma check kung anong klase agua rio fun, nung nakita ko ang v2, mejo na bunutan ako ng tinik. at sinubukan ko na 'to. Palpak na lang

    ReplyDelete
  71. ang suggestion ng kaibigan kong dev/tech ay ipa reset na daw ung board mismo sa mga techs. pero nadedetect pa naman sa pc ung phone at nkakapagflash pero hanggang 4% lang palagi.

    ReplyDelete
  72. Dun pa sa friware na hangang 4% lang at hang na na expirience ko narin yan dun sa na download ko na rom kaya dapat physical format mo 100% whole format tapos pag 100% saka po kayo mag format and download parin same procedure no battery inserted at hold volume po till mag 100%

    ReplyDelete
  73. Correction frimware

    ReplyDelete
  74. ano ung physical format?

    ReplyDelete
  75. di na rin ako makapag format

    BROM ERROR: S_DA_NAND_UNKNOWN_ERR (3040)

    ReplyDelete
  76. Sir john paturo po sa kanila kung panu makikita ung advace setting sa flash po para makita ung physical format tnx po nasa work pakasi ako tnx

    ReplyDelete
  77. ctrl+alt+v ung advance settings. pero di ko makita ang physical format.

    ReplyDelete
  78. Dapat chineck mo muna kung ano software version..

    Kasi base sa experience ko sa myphone rio fun, rio craze, rio junior...

    Kapag napalitan ng software version namamatay ang cellphone...

    Contact mo ako sa fb baka sakaling matulungan kita.

    ReplyDelete
  79. Contact mo ako sa fb. May ipapagawa ako or ako nalang gagawa via teamviewer...

    ReplyDelete
  80. http://www.4shared.com/rar/2ww2RPIiba/My_Phone_Agua_Rio_Fun_v2_by_da.html http://www.4shared.com/rar/Gl0ao8uXba/myphone_agua_rio_fun_v2_mtk657.html
    http://www.4shared.com/rar/1bioQRyOce/MTK_Flash_Tool_v51352_2.html


    Sir,pa try nito link yan po ginamit ko.

    ReplyDelete
  81. kayo napo bahala kung alin uu nahin nyo na frimware.tnx po yung procedure as is parin kay sir john pero sa physical format muna po tayo sabay pag 100% balik po tayo sa format/download

    ReplyDelete
  82. ganun din yung version ng myphone agua rio fun v2 ko chineck kopa nga sa factory mode v1.09 tlga sya for now naghahanap pa ako ng solution pag nakakita ako share ko sa inyo

    ReplyDelete
  83. Nag uncheck ka rin ng preloader?

    Sige sir share share nalang tayo ng idea..

    ReplyDelete
  84. bakit di subukan muli

    ReplyDelete
  85. kung privacy lock lang ang prob try nyu nlng yung gnwa nila dto 3 steps lng using miracle box para di na mgreflash di ko pa natry http://www.gsmpioneer.com/forum/showthread.php?t=83505

    ReplyDelete
  86. volcano box na bin file masmaganda

    ReplyDelete
  87. Kaya lang dun sa may me box na gamit eh posible maayos talaga yun kaya lang napakamahal ng volcano box or anu panamang box,kaya tiyaga tayo sa flasher at scatter file

    ReplyDelete
  88. oo inuncheck ko preloader pagdownload nya huminto sa 4% the bam dead na ang rio fun 2

    ReplyDelete
  89. tnry ko yung advance nag 100% format and download kaso ayaw padin nya magbukas

    ReplyDelete
  90. privacy lock lang, sana.

    ReplyDelete
  91. yes my agua riofun v2 is alive haha imei nlng

    ReplyDelete
  92. Share na yan :-

    ReplyDelete
  93. san po ma kikita yong physical format sir? sa spft

    ReplyDelete
  94. sir fail pa rin, hindi pa rin nag oon

    ReplyDelete
  95. success pag flash skin sir pro di parin mag on myphone ko anu problema?

    ReplyDelete
  96. Si yrrej ano kaya ginawa niya... Wala reply eh..

    ReplyDelete
  97. sabi sa inyo konting tiyaga at diskarte lang mga kasama sa pag gawa ng cp

    ReplyDelete
  98. Marjameson wait
    u lang upload ko yung isang file para DL mo kasama na flash at frimware ok

    ReplyDelete
  99. masmaige yan nabuhay may maiishared kaba kung papano u nabuhay at kung anung frimware nagamit u?sa IMEI yun nalang problema u diba?

    ReplyDelete
  100. sir same problem here... ginawa ko ung instraction mo... dead boot na rio fun v2 ko.... help nman po

    ReplyDelete
  101. sir enge naman nung link... try ko lng baka gumana sakin... thanks...

    ReplyDelete
  102. pa download ung mga link na bngay ko den sunod lang sa procedure ni sir john.

    ReplyDelete
  103. sir ung DEBskie rom d rin gumagana... S5200 PREloader ng phone ko eh... ndi s5202


    yan ata isa sa mga problema eh...

    ReplyDelete
  104. aDaN cRiS eStAlAnEApril 26, 2015 at 3:45 PM

    hi po..meron po ba kayong back-up ng nvram nito??pwede po bang pahingi ng link

    ReplyDelete
  105. bakit yung Pinapadownload eh MT6571 tapos yung TUT MT6572

    ReplyDelete
  106. Kung mapapansin mo lahat ng tutorial ko dito lahat mt6572.. 😊

    ReplyDelete
  107. Bro may problem ako...
    Bootloader doesn't exist on nand flash. please download bootloader first...

    ReplyDelete
  108. Sir eto po FB ko https://www.facebook.com/borzz.ramos

    sana po matulungan po ninyo ako...

    ReplyDelete
  109. san na po sir yong file?

    ReplyDelete
  110. Sa taas po, sa may download these files...

    ReplyDelete
  111. Gamit ka po kingroot, sa pagroot maraming beses mo uulitin kasi kusang magrerestart minsan. Basta ulit ulitin mo lang hangang magsuccess ka sa pagroroot.

    Buti sayo hindi tumigil sa pagflash...

    ReplyDelete
  112. Sir John, thank you talaga for assisting me on facebook. :D ok na ok ang TUT mo :D

    ReplyDelete
  113. okey-buti-nabuhay-sayo:)


    yong-iba-dito-wala-talaga....

    ReplyDelete
  114. Sad. Lahat ng method ginawa ko na pero ayaw niya . 4% of death yung nangyayari sakin , Tapos yung sw parehong pareho naman sa blog na to , Ayaw niya talaga . Pati yung sa mga comments dito nagbasa ako pero walang nag work :( Please reply ...

    ReplyDelete
  115. kahapon po may natulungan ako ganyan din sayo ang problem. ginamit po niya yung isang version ng flashtool

    eto po
    http://www.mediafire.com/download/z2j9hfsh09ur607/SP_Flash_Tool_exe_windows_v5.1420.00_Prem_India.zip

    ReplyDelete
  116. Sige po try ko po . Update ko nalang po kayo kung may progress or changes na nangyari . :D

    ReplyDelete
  117. Sir Ayaw niya pa rin . :( Puro error po lumalabas kahit anung method gamitin ko . Maraming ver. stock rom ako na ginamit pero wala talaga . :( Kapag Firmware upgrade po ginagawa ko , Error niya po " Failed to get PMT info" . Please help me sir T_T

    ReplyDelete
  118. Kailangan mong i-check yung preloader . :D

    ReplyDelete
  119. PLease help me John :( di ko ma complete ang Flash mag Error xa nakalagay

    S_FT_NFB_DOWNLOAD_CODE_FAIL 4014
    Faild Download images NAND FLASH ! ! ! !

    Help me or Teamviewer

    ReplyDelete
  120. Mark Anthony SisonMay 8, 2015 at 3:10 PM

    ser, e pano naman po pag 1.08 yung version ? gagana po ba ito ?

    ReplyDelete
  121. Hindi ko pa natetesting sa 1.08...pwede mo subukan :-)

    ReplyDelete
  122. may update naba?

    ReplyDelete
  123. wala pa. Pero may nagpatulong sakin nagtry lang siya ng ibang flash tool nabuhay yong phone. Si Akasha ang pangalan. Sa baba na comment.

    ReplyDelete
  124. Di gumana sakin. Sinubukan ko na yung SPFT na ginamit ni Akasha (see below), tapos nag format whole flash ako gaya ng ginawa ni sir Jay-jay Balanon (also below), nag-unkown error sa NAND, tapos "Unidentified device" na lumalabas sa PC ko kada sinasaksak na yung Rio Fun. :'( Nung una 4% of death lang, ngayon di na ma-identify device ko. Di ko na alam gagawin ko. :(

    ReplyDelete
  125. Paano nyo na-Physical Format? Wala po ako makitang option na ganyan sa SPFT kahit sa advanced setting.

    ReplyDelete
  126. mga sr. pa help po ako .. gnwa ko po nag advance mode po ako.. tpus gnwa ko lht ng step na pngawa skn ni sr. john ..ok npo sa format tab nag success cia tpus ppnta pa ako sa download tab .. pag nag advance mode dba dlwa ang download dun.. hnd ko alm kung download o ung dl certification ung icclick ko.. plsss helppp

    ReplyDelete
  127. try niu to, https://www.facebook.com/groups/683731781732792/permalink/684311295008174/
    join nlng kung di makita, di ko prinopromote yan gumana lng sakin kaya ayan. sana may matulungan ako. btw. Thanks din sa inyo nakapulot ako idea. credits nlng sa ngshare ng tut na yan dyan sa group.

    ReplyDelete
  128. nasira lng phone ko0 bwisit

    ReplyDelete
  129. buset kailangan wag bitawan ung vol down para mag tuloy ung pag flash

    ReplyDelete
  130. pano po mawala ang privacy protection on my phone rio fun

    ReplyDelete
  131. Pano po maaayos my phone agua Rio fun s5200?......help.....is there....a way to fix this....dead Boot but detected by the PC......ahm....yung nakalagay po sa dulo ng custom build nya ay v1.08 po....

    ReplyDelete
  132. sir pano un lagi nlng po 4% ano dapat gawin pag ganon tnx

    ReplyDelete
  133. LezahMik De GuzmanJuly 2, 2015 at 10:32 AM

    anu n ggwen ku bootloader does not exist.!!! help!!!

    ReplyDelete
  134. Pahelp nmn po d2 na DEAD BOOT sya after i tried flashing CWM Recovery

    ReplyDelete
  135. sir may naisip po ako baka po yung model ng battery di na pwede ? kase may naka sula s5200 saka s5202 .. sana magawa ko na tong phone na to tagal ko na kayong sinusubaybayan

    ReplyDelete
  136. sir thanks very usefull whole day fixing to


    i start 6am..
    my goal is 1:23 without eating hahah

    ReplyDelete
  137. contact me hehe

    ReplyDelete
  138. Ayus lang naman yan sa battery...

    ReplyDelete
  139. boss gnun dn nangyayare skn gang 4percent lng tlga ano dapt gawin mga boss

    ReplyDelete
  140. Sir pa help namn bakit ganun halos karamihan samin same ng yari tama naman yung step na ginawa na follow ko namn po pero bakit siya na sstock sa 4% then after nun ayun ayaw na mag responce ng cp riofun v2 rin po sakin yung tinatawag na na brick narin po sakin pano po ma aayos to o ma uunbrick patulong naman po bwesit na privacy lock kasi e

    ReplyDelete
  141. hINDI PARIN na solve sir?

    ReplyDelete
  142. boss patulong san po ba makikita firmware ng riofun 2, please po patulong wal pa pong 1 month to na dead boot po

    ReplyDelete
  143. Guys...ok na ung Rio na pinagawa sakin...

    nung sinubukan ko ung sa taas...nangyari ung nag stop sa 4%..so dapat pala di bnibitawan ung vol up or vol down....pra magtuloy tuloy...

    tpos edi un nga..4% tpos katulad nung ngyari sa iba...ayaw na mag on at mag charge...

    so nag basa2 ako dito...tapos pinagsama sama ko nalang...

    ginawa ko...nag download ako ng latest version ng SPFT...ung ginamit ko V5.1528..

    http://androidxda.com/smart-phone-flash-tool <--- get nyo dyan ung pinaka latest na SPFT

    tpos ginawa ko ung advance mode...

    Ctrl + alt + V

    then sa Format tab..select nyo auto format flash then format whole flash tpos forcedly erase..

    tpos sa options (ctrl + shift + o) sa download lagyan ng check ung physical format/readback...un lang nka check..then close nyo na...

    dun sa format tab...press nyo na ung start

    then ung sa phone...press and hold nyo ung vol up or vol down...WAG BIBITAWAN tpos insert nyo ung usb cable...

    WAG BIBITAWAN hanggang di pa tapos ung format..

    my llbas dyan na format complete..

    then kapag complete na..remove nyo ung usb cable..

    tpos dun nman tayo sa download tab....

    load nyo ung scatter loading file...then lahat may check...wala kayong i-uuncheck...tpos press download...

    then gnun ulit..press and hold vol up or down then insert usb cable...tpos wag ulit bibitawan hanggang di pa nalabas ung download complete...

    kpg complete na..remove nyo sa usb cable..then try nyo kung mag o-on...kapag nag on...edi masaya na..hehehe

    balik ult tayo sa SPFT...ngaun naman...i-uncheck nyo na ung PRELOADER...wag nyo ng lagyan ng check...

    then gnun ulit same process sa taas...

    press and hold vol up or down then insert usb cable...tpos wag ulit bibitawan hanggang di pa nalabas ung download complete...

    kpg complete na..remove nyo sa usb cable..then try nyo kung mag o-on...kpag nag on..wait nyo lang....give it some time...tpos mmya mag direcho na yan...

    yan po ginawa ko...at success naman po.... :)

    invalid imei naman po ang next...hehehe

    thanks dito! :) sana nakatulong ako...hehe

    ReplyDelete
    Replies
    1. salamat po sa tip, makakatulong yan sa iba.

      Delete
    2. hindi parin ma on at macharge ang myphone rio fun v2 ko pa help plss

      Delete
    3. Sir tom,

      Nandyan na po lahat sa sinabi ni sir mar dc... Yan lang gagawin... Kung ayaw parin mag on gamit ka iba flash tool po...

      Delete
    4. nagsusucess nmn plagi sakin pero ayaw pdin mag on or mgcharge myphone agua rio fun ko.. sinunod ko nmn lahat yang instructions ni kuya marc

      Delete
    5. nag complete pero ayaw mag on

      Delete
  144. ano po ang passwword ng file n ndownload ko ung mtk6571

    ReplyDelete
  145. pano po pag 1.17 ang version pwede rin po ba?

    ReplyDelete
  146. sir good evening po,, baka nman po may alam kayo kung paano maunlock ung privacy password na hinihingi ng myphone rio fun 3G di ko po kasi alam kung anu ngyari wla nman po ako sineset up na gnun.. 2 weeks plang po sakin ung cp ko.. kakabili ko lang TY

    ReplyDelete
  147. ok na eh ngsusucess lhat.. bkit ayaw pdin mag on at magcharge

    ReplyDelete
  148. ayun nag on na cp ko.. muntik na ako sumuko haha.. last kong try format all + download after nyn nag on na cp ko... kya nga lng unavailable IMEI salamat po

    ReplyDelete
    Replies
    1. panu po sir yung ginawa nyo? bootloop pa din e

      Delete
  149. sir bkt nag stop un download at 4%?

    ReplyDelete
  150. try ko lahat ng pag flash 100% ok xa ang flashing pero ayaw mag on. at charged V1 RIO FUN

    ReplyDelete
  151. nag 100% okay naman kaso lang bootloop pa din sya. pnu yun?

    ReplyDelete
    Replies
    1. hard reset ka po or try mo format all + Dwnload.

      Delete
  152. tanong po 2g po ba tlga myphone agua rio v2?
    di ko kac mapalitan sa 3g eh

    ReplyDelete
  153. Good day, Di ko alam kung out of topic, pero ask ko lang sa mga masters dito anung gagawin para ma expand ang memory ng aqua rio fun, pina gawa ko na po, na root nya lang pero di nya daw ma memory swap etc. any help will be appreciated.

    ReplyDelete
  154. Good day, Di ko alam kung out of topic, pero ask ko lang sa mga masters dito anung gagawin para ma expand ang memory ng aqua rio fun, pina gawa ko na po, na root nya lang pero di nya daw ma memory swap etc. any help will be appreciated. Salamat in advance

    ReplyDelete
  155. mga sir nag format+download riofunv2 hanggang4% lang patulong namn

    ReplyDelete
  156. mga sir nag format+download riofunv2 hanggang4% lang patulong namn

    ReplyDelete
  157. hello sir, succesfull naman po ang flashing pero bootloop pa din po, ano puede gawin, thanks

    ReplyDelete
  158. Hi guys eto na solve nayan deadphone nyu just follow tut

    http://www.gsmworldfive.com/forum/showthread.php?t=49055

    ReplyDelete
  159. gamit ko ang Agua_Rio_Fun_20140424_V1.13-ASP working sya

    SP Flash tool v5.1416.00

    http://catalog.xdrv.ru/flash/mobile_phones/companies/mediatek/models/sp_flash_tool/30720

    Vroot for IMEI

    http://catalog.xdrv.ru/flash/mobile_phones/companies/mediatek/models/sp_flash_tool/30720

    ReplyDelete
  160. Yung phone ko na ayaw mag On na fix narin hahaha meron pa IMEI :D Credits kay jhust_6768

    ReplyDelete
    Replies
    1. boss baka pwede pacopy paste nung nandun sa forum. account has been suspended daw pag cnlick ko ung link sa gsmworldfive

      Delete

Pages