Neo Omnipad A74 Stock ROM, Alternative ROM, Pattern Lock, Google Account Removal, Flashing

Before you proceed flashing / hard resetting your phone / tablet make sure to back up your important files if possible. Because we care about your data.

We also suggest that your battery should be atleast 50% or better to have it fully charge, lower than the said value may cause unwanted result, such as bricking your phone / tablet rendering it unuseable. This is very important in flashing your phone / tablet. Use original USB cable as possible.

Files that you downloaded should not be corrupted, if ever the file is corrupted you might brick your phone. Or the flashing will start.

Drivers are very important specially in Spreadtrum Chipset, having an Spreadtrum SPD6610 (non android devices) driver will not work in SPD6820 (android devices).

If you are using laptop to flash your phone, make your that it has enough charge. If your laptop shutdown when your flashing your phone/tablet, you'll end up bricking your phone. Sometimes you can still recover your phone just flash it again and your phone will boot up again. But that is just a case to case basis, if your phone / tablet is deadboot (totally dead, erased all program in the chip) you can't recover it, you will need to seek professional help (technician).

---

This is the stock ROM of Neo Omnipad A74 or alternative ROM of Neo Omnipad A74, all hardware are working including the camera, wifi, touchscreen etc...

The tools and firmware are already included in the file that I will provide.

This tutorial fix the following issues in your tablet:

1. Google  Account Lock up Removal

2. Pattern Lock Removal - this is the alternative way if  the usb debuging mode is not activated in the settings

3. Hang in Android Logo
4. Bootloop
5. Forced Close Applications
6. Accidentally deleted systemUI

OK let's proceed.

1. Download the firmware and tool here  --- >>> Firmware Tool

2. If you are done, extract it and install first the Pad Firmware Upgrader which is located in Pad end user upgradev1.01, It has already the driver when you install the software for flashing. Run setup.exe to install it.

3. Connect your tablet to the PC, your tablet should be power off, wait for the driver to install.

4. Open Pad Firmware Upgrade, Start>All Programs>Actions Tools

5. Click the green icon

6. Then juli.fw which is the firmware
7. Then press upgrade button. And connect your tablet in your PC.


Note: Driver is already included in the Pad Firmware Upgrade Tool, just connect your tablet in your PC and that will automatically install the driver.

Wait for it until the progress bar reach 100%. Just wait patiently :) When its done flashing sometimes the tablet does not power up automatically. Just press the reset button at the back of the tablet. Or try pressing the power button for about 10 seconds.

I hope this tutorial helps. If you have any suggestions just drop a comment ;)