Just Another Gadget Blog

Breaking

Saturday, July 12, 2014

Neo Omnipad A74 Stock ROM, Alternative ROM, Pattern Lock, Google Account Removal, Flashing

Before you proceed flashing / hard resetting your phone / tablet make sure to back up your important files if possible. Because we care about your data.

We also suggest that your battery should be atleast 50% or better to have it fully charge, lower than the said value may cause unwanted result, such as bricking your phone / tablet rendering it unuseable. This is very important in flashing your phone / tablet. Use original USB cable as possible.

Files that you downloaded should not be corrupted, if ever the file is corrupted you might brick your phone. Or the flashing will start.

Drivers are very important specially in Spreadtrum Chipset, having an Spreadtrum SPD6610 (non android devices) driver will not work in SPD6820 (android devices).

If you are using laptop to flash your phone, make your that it has enough charge. If your laptop shutdown when your flashing your phone/tablet, you'll end up bricking your phone. Sometimes you can still recover your phone just flash it again and your phone will boot up again. But that is just a case to case basis, if your phone / tablet is deadboot (totally dead, erased all program in the chip) you can't recover it, you will need to seek professional help (technician).


This is the stock ROM of Neo Omnipad A74 or alternative ROM of Neo Omnipad A74, all hardware are working including the camera, wifi, touchscreen etc...





The tools and firmware are already included in the file that I will provide.

This tutorial fix the following issues in your tablet:
1. Google  Account Lock up Removal
2. Pattern Lock Removal - this is the alternative way if  the usb debuging mode is not activated in the settings
3. Hang in Android Logo
4. Bootloop
5. Forced Close Applications
6. Accidentally deleted systemUI

OK let's proceed.

1. Download the firmware and tool here  --- >>> Firmware Tool
2. If you are done, extract it and install first the Pad Firmware Upgrader which is located in Pad end user upgradev1.01, It has already the driver when you install the software for flashing. Run setup.exe to install it.
3. Connect your tablet to the PC, your tablet should be power off, wait for the driver to install.
4. Open Pad Firmware Upgrade, Start>All Programs>Actions Tools
5. Click the green icon



6. Then juli.fw which is the firmware
7. Then press upgrade button. And connect your tablet in your PC.


Note: Driver is already included in the Pad Firmware Upgrade Tool, just connect your tablet in your PC and that will automatically install the driver.

Wait for it until the progress bar reach 100%. Just wait patiently :) When its done flashing sometimes the tablet does not power up automatically. Just press the reset button at the back of the tablet. Or try pressing the power button for about 10 seconds.

I hope this tutorial helps. If you have any suggestions just drop a comment ;)

31 comments:

  1. tnx its really works tested.. :)

    ReplyDelete
  2. thank you sir for the feedback :)

    ReplyDelete
  3. guys, my neo a74 tablet is in bootloop can I fix it using this stock rom?

    ReplyDelete
  4. Yes you can fix your tablet with this stock rom...

    ReplyDelete
  5. Ahm... can i use livesuit flashing tools...? cuz i really don't know how to connect this tablet in pc. It wont detect anymore :(... can u help me? this is the only tablet I ever had.... hope it can be fix......

    ReplyDelete
  6. No this tablet uses different software to flash your phone, it is already included in the files that you are going to download, just follow the procedure carefully, and Im sure that you can fix your tablet.

    ReplyDelete
  7. but my tablet cant recognize by the pc..... can you help me how to connect it so that it can be detected by the pc?

    ReplyDelete
  8. maam..... kailangan ko na talaga tulong nyo..... mag-iisang linggo na pero hindi ko pa din alam panu ayusin to..... d po kasi makaconnect ang tablet ko kahit sinunod ko na lahat ng steps..... ano bang dapat kong gawin....?????

    ReplyDelete
  9. maam magdadalwang linggo napong bootloop ang tablet ko..... sinunod ko po lahat ng steps mo pero d parin madedetect ng pc ang tablet ko kahit anong gawin ko...... :( d ko po talga alam panu madedetect ito.... sana namn po tulongan nyo po ako.. :( wala na kasi akong pambili.... :(

    ReplyDelete
  10. kung gusto mo po magset ka ng time iti-teamviewer ko nalang at ako mag aayos baka maayos ko...

    ReplyDelete
  11. pwede po ba ngayung linggo ma'am mga 9am or 10am?

    ReplyDelete
  12. OK pwede...contact mo lang ako sa google hangouts

    ReplyDelete
    Replies
    1. maam help po ung tab ko po na omnipad,, nag hang po sa logo anu po dapat kong gawin

      Delete
  13. cge po contact nlng po kita......

    ReplyDelete
  14. maam online na po ako sa hangouts........

    ReplyDelete
  15. hi po pasensya na po brown out dito sa amin mag hapon.. kaya hindi po ako naka online.. 9 am to 5pm po yong brown out samin...

    ReplyDelete
  16. mam goodmorning po. ask ko lang po kung pwede ko ba tong gamitin sa neo omnipad m71-3g? kasi po na-brick yung tab ko kaya hnd dn po ako makapag dump ng stock rom.

    ReplyDelete
  17. hindi po pwede...

    ReplyDelete
  18. very laggers po ang a74 omnipad ko, paano po ito mga sir nd maam?

    ReplyDelete
  19. 2200mAh ang battery ng omnipad pwede kayang papalitan ng higher battery specs para hindi mabilis ma lowbatt

    ReplyDelete
  20. TY sa firmware really works! mas mabilis na omnipad ko at wala ng hang. Yun na lang battery ang issue ang bilis madrain to think tsinugi ko na mga batt app vampires!

    ReplyDelete
  21. Thanks for the feedback sir :)

    ReplyDelete
  22. Pwede basta same ang voltage ng battery...

    ReplyDelete
  23. ..pa help po, during upgrade , na stock po aq sa 35% tpz nag upgrade fail napo aq..

    ReplyDelete
  24. Paulit nalang po...

    Pwede padin naman yan maflash ulit.

    ReplyDelete
  25. Pa help naman po nagawa ko naman yung instruction pero nung nainstall ko na siya na stock na ko sa Boot logo nang PAD hindi na siya tumuloy tpos hindi na rin siya madetect sa PC ano po kailangan kong gawin? TIA

    ReplyDelete
  26. pde po ba makahingi ng driver ng neo omnipad ? di po kc ako makagawa ng scatterfile e. totally dead kc ung tab. pero nag cconnect pa sa computer. pls help. TIA

    ReplyDelete
  27. Thank you gumana po ito thank you thank you

    ReplyDelete
  28. d madownload un flash file paupdate po

    ReplyDelete
  29. di na madowload yung link pa update po

    ReplyDelete

Pages