Just Another Gadget Blog

Breaking

Friday, September 19, 2014

Torque Droidz Easy Stock ROM / Firmware to unbrick your phone

Im finally done uploading the stock rom/firmware of Torque Droidz Easy. This phone has an MTK Chipset. You can download the tools that is needed to unbrick your phone below.

Updated with Jellybean and Kitkat version of firmware


"Download these files"
Firmware Here -->Torque Droidz Easy Jellybean 4.2.2
Firmware Here --> Torque Droidz Easy Kitkat 4.4.2
VCOM Driver -->VCOM Manual
Alternative Driver --> AutoInstaller
SPFlashTool --> LatestVersion 


"Use WinRar or 7zip to extract the firmware"
"Extract the files to your desired folder"
"If you encounter error in flashtool, use different version of it."

"I suggest to use 32bit Windows OS for compatibility of the driver"


Installing Driver with AutoInstaller


First try the Alternative Driver, which is the AutoInstaller. Just open the install.exe then it will automatically install the driver. To fully check if the driver is correctly installed in your computer. 

Follow these steps:
  1. Turn off your phone (always powered off is a must)
  2. Press and hold volume up or down, or you can simple press the two button
  3. Insert your USB cable without releasing the VOLUME button(s).
  4. In your computer, it must detect your phone and it will install the MTK Preloader or Mediatek USB VCOM driver.
  5. Repeat 1 to 4 if it does not detect your phone.
  6. If MTK Preloader/Mediatek USB VCOM Driver is installed you are good to go in flashing your phone ^_^


Reference Video using Driver Auto Installer (watch in HD)

Installing Manually using VCOM Driver

When installing it manually your phone must be turned off, then connect it to your computer/laptop while pressing VOLUME UP or VOLUME DOWN. This will detect and look for the driver.


 1. This is the first time that you will connect your phone and it will search for the correct driver.

2. Check include this location ... ... and click on browse. Look for USB VCOM Driver and Click on 2K_XP_COM folder if you are using Windows XP or Win7 for Windows 7 and then press OK when you are done picking the right folder for the driver.


3. If the driver is successfully installed MediaTek DA USB VCOM will appear in the New Hardware Wizard.

Video Installing VCOM Driver (please watch in HD)




"Your Phone must be turned off when you are ready to connect and flash your phone"

Flashing
1. Launch FlashTool (flash_tool.exe)
2. In Flashtool, Click on Scatter-Loading, and load your scatter file. (see example below)

Reference Video Using FlashTool version 5.xxx (watch in HD)

 3. After you load the file, press Press Download to Flash your Phone.

4. After you press Download Follow these steps
  • Turn off your phone (always powered off is a must)
  • Press and HOLD volume UP or Down or you can simply press it simultaneously
  • Insert your USB cable without releasing the VOLUME button(s).
  • Keep on repeating until Flashtool detected your phone.
5. If successfully detected just wait until the progress bar reaches 100%. If your phone did not automatically turn on after flashing, remove battery and USB cable. And put back your battery then turn on your device.


"Hard reset your phone after flashing"


Some workarounds:
If you encounter PMT_Changed error here is what you do:
In Latest version of Flashtool
  1. Load the scatter file
  2. Choose Format all + Download (Underneath Scatter-loading file)
  3. Then Click Download and wait until it is done flashing
For Invalid IMEI:Your Phone/Tablet must be rooted first
Restore yong IMEI in MTKDroidTools version 2.5.3. You will have this error when you format your phone in Flashtool as I had experienced. To restore download MTKDroidTools version 2.5.3 After you extract the file. Open the green robot, you must enable the usb debugging in your phone. It is usually located in Settings>Devoloper Mode then look for usb debugging. After enabling it. Connect your phone in your computer then in MTKDroidTool click on ROOT. Wait for it to finish, then Click in IMEI/NVRAM, input 15 number in each box. Then click REPLACE. Then click Reboot or you can manually turn off your phone. Then turn your phone on again. You can see that you have fully restored your IMEI.


I hope this tutorial help you. Please drop a comment if something is not clear to you.
Tested by:
Keima Katsuragi Kun --> Kitkat Version, Jellybean Version, NVRAM

51 comments:

  1. pa help namn po d ako marunong mag gan2

    ReplyDelete
  2. sundan niyo lang po yan... may youtube video naman po ako para masundan ninyo.... basta pag nagpaflash laging tatandaan naka on dapat ang phone pag icoconnect mo na sa PC...

    ReplyDelete
  3. hindi ko po kasi kayo matutulungan, brown out pa dito samin..nakasaglit lang ako dito sa laptop kasi may charge pa naman...

    willing naman ako tumulong kaya lang palowbat na laptop ko :) 6% na nga lang eh.

    ReplyDelete
  4. sir nakalagay po device unplugged ano po gagawin ko na install ko na po
    ung auto installer at ung manual installer ku :) nung natapos na ung
    install i plug my phone without battery and ganun pa rin lumabas :)
    cguro po sa pc po may problem .. na try ko po sa comshop nag connect po
    ung cp ko .. kasu nga lang po ung filmware d ko dala eh mabagal internet
    hehe ... >>>>>>[ sundan niyo lang po yan... may
    youtube video naman po ako para masundan
    ninyo.... basta pag nagpaflash laging tatandaan naka on dapat ang phone
    pag icoconnect mo na sa PC.. ] <<<<<< sir dba pag naka
    on ung cp sa pc d gagana ?

    ReplyDelete
  5. yes dapat nakapatay ang cellphone... kasi hindi magkokonek kapag nakabuhay ang cellphone. sayang hindi mo pala dala yong file... try mo nalang ulit :) ano ba ang OS ng PC mo? Windows 7 ba?

    ReplyDelete
  6. sir i ttry ko ngaun sa comshop kung gagana .. :) sa pc ko po yata ang may problem kaya ayw gumana ng VCOM

    ReplyDelete
  7. sige itry niyo nalang po ulit...

    ReplyDelete
  8. Sir ! saan ko makikita ung CACHE file ne2 d ko po kasi makita :)

    ReplyDelete
  9. aun sir nag dl na cya tnx d2 try ko memeya i opn :) !!

    ReplyDelete
  10. sir bakit ganun nag hang na sa boot ng pag katapos i dl ung Recovery

    ReplyDelete
  11. sir mag hihintay po ba ako ?? dun sa nag hang sa boot ??

    ReplyDelete
  12. naghard reset ka ba pagkatapos??

    sensya na late magreply...

    ReplyDelete
  13. hindi kailangan yong cache file.. ok lang kahit wala yan.

    ReplyDelete
  14. Kung hang parin pagkatapos mo mag hard reset ganito gawin mo...



    1. click mo yong format sa Flashtool
    2. May Lalabas na bagong menu dyan, piliin mo yong Format except bootloader.
    3. Connect mo na CP mo, gaya ng pag flash

    4. Click mo na yong download at wait mo matapos magflash.
    5. Hard Reset mo yong CP mo.


    Kung succesful at mag tuloy yan, Invalid IMEI yan. Restore mo nalang sa MTK Droid Tools.

    ReplyDelete
  15. sir pagkatapos kong i flash ung cp ko d ko na po ma punta sa recovery mode kase nag hang sa logo boot :(

    ReplyDelete
  16. Natry mo rin po yung reply ko na mahaba?

    Yung ipoformat sa flashtool?

    ReplyDelete
  17. oo sir kaso n7ung i tinuturn on ko ung cp ko wala d siya na oopen

    ReplyDelete
  18. gan2 po ginawa ko
    1. format expect bootloader ... DONE
    2. DL. ung flash
    3. connect ung cp without battery
    4. Done downloading ung flash
    5. turn on ung cp

    6. ang lumabas ung bootloader kaso dun lang cya

    ReplyDelete
  19. ito nalang last...

    itry mo dito sa latest flash tool

    http://www.mediafire.com/download/5f5h3owa7s7y6g2/SP-Flash-Tool-v5.1352.01.zip


    Gaya din ng dati load mo yong scatter file..tapos yong download only gawin mong Format All + Download tapos pindotin mo na yong Download button

    ReplyDelete
  20. sir e2 po ung lumabas dun sa latest

    BROM ERROR : S_FT_ENABLE_DRAM_FAIL (4032)

    ReplyDelete
  21. ganon ba...hmmm... kung gusto mo itatry ko iteamviewer, baka magawan ko paraan. set ka lang ng time kung kelan mo gusto... pwede ba? baka sakaling maayos ko... kung hindi talaga baka yang file ko ang may problema...

    iPM email mo nalang ako kung kelan... email ko gadgetzboyz@gmail.com

    ReplyDelete
  22. ok sir kaso matatagalan ata ako makapag dl ng teamviewer kasi mabagal net d2 ..... sabihin ko nalng kung kelan ako pede :) sir kung pede po add ninyo po ako sa fb para makapag chat tayo :) https://www.facebook.com/olmidillo

    ReplyDelete
  23. sir pina program ko ulit ung cp ko dun sa sm kanina pag tingin ko parehas ung procedure na ginawa niya cguro po sa filmware ang may problem

    ReplyDelete
  24. Sir Rooting ba yan? e ro-root ko sana Torque Droidz Easy ko ang liit lang kasi ng RAM eh...

    ReplyDelete
  25. ay hindi po. flashing po ito. kung kailangan niyo irecover ang phone niyo.

    ReplyDelete
  26. Pano po sir :)

    ReplyDelete
  27. Sir tri-nay ko mag downlaod ng vroot malicious po may dala virus yung binigay nila na application...

    ReplyDelete
  28. Sir yung Vroot tri-nay ko pero may virus po eh takot ako masira laptop ko may iba pa po bang rooting application maliban sa Vroot??

    ReplyDelete
  29. OK naman yang vroot, nainstall ko yan sa PC at laptop ko...

    ReplyDelete
  30. Kenneth Russell L TanavalJanuary 21, 2015 at 5:42 PM

    sir update po ba yang kitkat na yan? pwede ko bang iflash iyan gamit ang recovery mode?

    ReplyDelete
  31. pang Flashtool lang po yan... Opo update yang kitkat, working yan may nakapagtry na niyan si Kingjames Desu sa FB.

    ReplyDelete
  32. Kenneth Russell L TanavalFebruary 8, 2015 at 2:50 PM

    haha.. kla ko kaya ng phone.. di pla nasira na kasi yung volume button at power button.. sayang.. matagal ko pa nmn inaabangan tong update na to.

    ReplyDelete
  33. peede yan iflash no need to use volume buttons..

    ReplyDelete
  34. Ate.... yung my phone rio craze ko.. pag katapos ko e hard reset.. bakit ayaw mag ON?

    ReplyDelete
  35. meron bng driver for windows 7?

    ReplyDelete
  36. Uriah Izra ChEn EspinosaApril 16, 2015 at 4:13 PM

    panu po ba yan ung nag Factory mode yung droidz easy ko. Paano po ho ba?
    please help me.

    ReplyDelete
  37. volume down + power button ata. patry po.

    ReplyDelete
  38. Invalid imei idol. Anong gagawin ko? Baseband unknown nka lagay run as settings nya.

    ReplyDelete
  39. Kailangan mo po ng NVRAM para marestore yan.

    ReplyDelete
  40. Guys Help naman po ayaw pong ma on ng phone ko .. kahit mag charge ayaw ....

    ReplyDelete
  41. wala naman pong scatter file sa rom

    ReplyDelete
  42. Meron po yan, padouble check po ng nadownload niyo...

    ReplyDelete
  43. Ser maraming salamat naaus ko ung phone ko haha updated to kitkat p haha. working to guys. konting tyaga lng (y)

    ReplyDelete
  44. check the usb debbuging

    ReplyDelete
  45. thank you for this firmware its better than rio junior

    ReplyDelete
  46. pano po ba talaga i root yan? thanks..:) ang liit lang po kasi ng int. salamat sa makakapansin :)

    ReplyDelete
  47. Hi, hindi ko madownload yung kitkat firmware paki upload na lang sa mega

    ReplyDelete

Pages