Just Another Gadget Blog

Breaking

Sunday, January 25, 2015

Cherry Mobile Flare Lite Stock rom / firmware to unbrick your phone

Hi,

Yesterday I was able to make a ROM dump of Cherry Mobile Flare Lite. And here it is. It is ready for download. I was able to test it too in a dead Cherry Mobile Flare Lite yesterday. So I can assure that this firmware is fully working. You can download the file below.






You can fix the following issue in your phone:

1. Bootloop
2. Damaged System UI
3. TP Upgrade only
4. Dead phone but it is detected in computer
5. Remove Gmail Account / Password / Pattern Lock (Alternative Way)
6. And other issues with your phones firmware

"DOWNLOAD THESE FILES"
Firmware Here -->Cherry Mobile Flare Lite Part 1
VCOM Driver -->VCOM Manual
Alternative Driver --> AutoInstaller
SPFlashTool --> LatestVersion 


"Use WinRar or 7zip to extract the firmware"
"Extract the files to your desired folder"
"If you encounter error in flashtool, use different version of it."

"I suggest to use 32bit Windows OS for compatibility of the driver"


Installing Driver with AutoInstaller


First try the Alternative Driver, which is the AutoInstaller. Just open the install.exe then it will automatically install the driver. To fully check if the driver is correctly installed in your computer. 

Follow these steps:
  1. Turn off your phone (always powered off is a must)
  2. Press and hold volume up or down, or you can simple press the two button
  3. Insert your USB cable without releasing the VOLUME button(s).
  4. In your computer, it must detect your phone and it will install the MTK Preloader or Mediatek USB VCOM driver.
  5. Repeat 1 to 4 if it does not detect your phone.
  6. If MTK Preloader/Mediatek USB VCOM Driver is installed you are good to go in flashing your phone ^_^


Reference Video using Driver Auto Installer (watch in HD)

Installing Manually using VCOM Driver

When installing it manually your phone must be turned off, then connect it to your computer/laptop while pressing VOLUME UP or VOLUME DOWN. This will detect and look for the driver.


 1. This is the first time that you will connect your phone and it will search for the correct driver.

2. Check include this location ... ... and click on browse. Look for USB VCOM Driver and Click on 2K_XP_COM folder if you are using Windows XP or Win7 for Windows 7 and then press OK when you are done picking the right folder for the driver.


3. If the driver is successfully installed MediaTek DA USB VCOM will appear in the New Hardware Wizard.

Video Installing VCOM Driver (please watch in HD)




"Your Phone must be turned off when you are ready to connect and flash your phone"

Flashing
1. Launch FlashTool (flash_tool.exe)
2. In Flashtool, Click on Scatter-Loading, and load your scatter file. (see example below)

Reference Video Using FlashTool version 5.xxx (watch in HD)

 3. After you load the file, press Press Download to Flash your Phone.

4. After you press Download Follow these steps
  • Turn off your phone (always powered off is a must)
  • Press and HOLD volume UP or Down or you can simply press it simultaneously
  • Insert your USB cable without releasing the VOLUME button(s).
  • Keep on repeating until Flashtool detected your phone.
5. If successfully detected just wait until the progress bar reaches 100%. If your phone did not automatically turn on after flashing, remove battery and USB cable. And put back your battery then turn on your device.


"Hard reset your phone after flashing"


Some workarounds:
If you encounter PMT_Changed error here is what you do:
In Latest version of Flashtool

PMT_CHANGED error occur when firmware is not compatible with your phone. Sometimes your phone has a different board version. You should check it too, if your firmware is compatible with your phone.  



If you encounter Privacy Protection Password:


  1. Open flash_tool.exe
  2. Load the scatter file
  3. Goto Format Tab
  4. Click on Format except bootloader
  5. Press Play/Start Icon
  6. Then remove battery
  7. Insert the battery again
  8. Insert the USB cable (you should hear a beep on your computer, and it should proceed in formatting.)
  9. After done formatting proceed in Flashing.
  10. Goto Download tab (I assume that you load the scatter file already)
  11. Uncheck PRELOADER (this is very important)
  12. Then remove battery
  13. Insert Battery again
  14. Insert the USB cable (you should hear a beep on your computer, and it should proceed in flashing or downloading the firmware in your phone.)
  15. Power ON the phone after flashing.
  16. Restore your IMEI.


For Invalid IMEI:Your Phone/Tablet must be rooted first
Restore yong IMEI in MTKDroidTools version 2.5.3. You will have this error when you format your phone in Flashtool as I had experienced. To restore download MTKDroidTools version 2.5.3 After you extract the file. Open the green robot, you must enable the usb debugging in your phone. It is usually located in Settings>Devoloper Mode then look for usb debugging. After enabling it. Connect your phone in your computer then in MTKDroidTool click on ROOT. Wait for it to finish, then Click in IMEI/NVRAM, input 15 number in each box. Then click REPLACE. Then click Reboot or you can manually turn off your phone. Then turn your phone on again. You can see that you have fully restored your IMEI. 




FOR DAMAGED BASEBAND or UNKNOWN BASEBAND (Your phone must be rooted first)

1. Make sure you have MTKDROIDSTOOL version 2.4.8 or version 2.5.3 (you can search it in google)
2.  In MTKDroidstool (I assume you launch the tool) -- Click in Root. 
3. In your device -- After you press Root, you need to authorize it. A pop up message will appear. Click Allow/Authorize depends on your root application.
4. In MTKDroidsTool -- Click in IMEI/NVRAM, then click in RESTORE.
5. Then look for the folder where you extracted the NVRAM files.
6. Check if the Baseband is fixed. And if the IMEI is fully restored.
7. If Baseband is still Unknown and IMEI is invalid. Then you need to hard reset first your phone.
8. After hard reset your baseband should be fixed already. (base on my experience)
9. If your baseband is fixed sometimes the IMEI is still invalid. So you need to restore the IMEI.
10.  To restore IMEI follow Step 1-4, but you should not restore. You should fill the IMEI then click REPLACE. Then reboot your phone.  VOILA! I hope the phone is fully working :)

I hope this tutorial help you. Please drop a comment if something is not clear to you.

Tested by:
ME - Flashing / Files 
Kyveen Ching - Flashing / Files
gilas101 -- Privacy Protection Lock / Flashing / Files
Rabamzz -- Privacy Protection Lock / Flashing / Files

149 comments:

  1. sir pahingi naman po ng stock rom ng flarelite thankx

    ReplyDelete
  2. nandyan na po ang link sa taas. pakihanap nalang po...

    ReplyDelete
  3. Bro, Pede ba to sa windows 8 gawin?

    ReplyDelete
  4. Pwede naman, may nakita ako sa youtube nagflash gamit ang Windows 8. Siguro kailangan mo lang ioff ang driver signing sa Windows 8. Wala kasi ako Windows 8 eh.

    ReplyDelete
  5. sir may file ba kayo sa 4shared ilang beses ko na poh kasi n download sa devhost kaso poros corrupted file

    ReplyDelete
  6. wala eh, Ayus naman dyan mag download sa devhost.... hirap din ako ngayon mag upload ng file. Baka po sa Download manager niyo ang problema.

    ReplyDelete
  7. sir.pwd po ba to gamitin pang.fix sa flare lite ko?..humihingi kasi nang privacy protection password eh,,tulongan nyo nman po aq :(

    ReplyDelete
  8. pwede po... bali po format po muna ninyo tapos flash na gamit ang flashtool...

    marunong po kayo magformat sa flashtool??

    ReplyDelete
  9. boss tungkol sa privacy protection password...pano po ba un?? gusto ko ksi na ako nlng gumawa pra iwas gastos... d daw ksi covered ng warranty un aha..TIA po pla :)

    ReplyDelete
  10. try niyo po format all + download sa flashtool. minsan kasi nagagawa yan sa ganyan....

    ReplyDelete
  11. boss nagawa ko na pero ganun parin? then nung nag reboot ako ayw na mag on? :(( na brick ata

    ReplyDelete
  12. ahh ganon ba...

    baka nalowbat lang po....

    ReplyDelete
  13. kahit i charge ko wlng nalabas :(

    ReplyDelete
  14. pero nag power On naman pagkatapos mo magflash?


    try mo po ulit iflash.

    ReplyDelete
  15. yes po the nag reboot lng ako nwla bigla...ayw na ma recognize sa computer sir

    ReplyDelete
  16. try mo walang battery, tapos hold mo volume up and down then insert USB.


    dapat magkonek pa.

    ReplyDelete
  17. naririnig ko po syang mag connect sa pc pero nwawala

    ReplyDelete
  18. nawawala talaga yan...pwede pa yan maflash... try mo nalang po macharge ang battery mo po...try mo iclip charger...

    ReplyDelete
  19. cge po try ko mmya papasok muna ko hehe salamat sir! :)

    ReplyDelete
  20. OK. sige try mo nalang.

    ReplyDelete
  21. sir!!! na try ko na ulit eto lumalabas...


    "BROM ERROR: S_FT_ENABLE_DRAM_FAIL (4032)
    [EMI] Enable DRAM Failed!
    [HINT]:
    Please check your load matches to your target which is to be downloaded"

    ReplyDelete
  22. sir nagawa ko na pero na stuck lng sa android kitkat screen...pano na po un?

    ReplyDelete
  23. nagtry ka maghard reset pagkatapos magflash...

    ReplyDelete
  24. ayos na sir maraming salamat sa tulong!....applicable ba tong tutorial sa kahit anong android phone? bsta may stock rom lng?

    ReplyDelete
  25. sir good day po ang prob ko po nung try ko root cp ko nung papasok na ng ctr or recovery mode biglang sira yung display tpos white screen n tpoa reboot tpos start upna gumagana naman sya kaso wla na recovery mode... pls pa help po....flare lite v04 yung gamit ko....q

    ReplyDelete
  26. flash ka nalang po v4 naman yang firmware ko dito...

    ReplyDelete
  27. ayy sori for the late reply....yes boss natanggal na ung privacy protection...ahh ok kla ko pede kahit sa anong android phone hehehe

    ReplyDelete
  28. OK thanks ulit sa feedback ;)

    ReplyDelete
  29. sir san ba kukunin ang scatter loading prang kulang kasi ang steps..sensya. newbie po. privacy password din kasi problem ko

    ReplyDelete
  30. sir idownload niyo po sa taas yong nakapart na firmware...para maextract niyo, nandoon kasi yong scatter loading na hinahanap niyo.


    kompleto na po yang procedure dyan.

    ReplyDelete
  31. ah kaya hindi pala nadect ng winrar yung firmware.. salamat sir. na.extract ko na.

    ReplyDelete
  32. sir may tut po ba kayu sa pagkuha ng full rom dump ng mt6572?

    ReplyDelete
  33. ay sir. hindi nawala yung privacy protection password. naflash ko na yung stock. san po ba ang options na format all?

    ReplyDelete
  34. sir nag format ba kayo sa flashtool bago kayo nag flash?

    ReplyDelete
  35. gagawa palang ako ng tutorial.. basta ext4 ang file system ang madali gawan ng back up.

    ReplyDelete
  36. Sir may error yung format + download na option. Pagkatapos mag format may lalabas na error.

    ReplyDelete
  37. sir manual ka nalang ng format, dyan sa flashtool may format tab dyan.

    tapos pag saformat tab kana lagyan mo ng circle yong format except bootloader.

    tapos press mo na yong play button para maformat.

    pagkatapos nyan proceed ka na ulit sa flashing ng firmware...

    ReplyDelete
  38. No Command ang lalabas sa recovery nya.

    ReplyDelete
  39. online ka ba sa fb? add mo nalang ako fb.com/redmateria

    dapat naka off ang phone kapag nagfoformat... kagaya lang sa flashing...

    ReplyDelete
  40. Ok na sir. Nawala na yung Privacy protection password. maraming salamat.

    ReplyDelete
  41. ok...oh bayad ka na kasi nagawa mo na.... hahaha jokes lang :-p

    ReplyDelete
  42. sir bakit po ganun na flash ko naman ng ayos tska nabalik ko n ung imei kya lng ayaw magbuks ng settings tska ndi q mkpg txt...

    lumalabas Unfortunately, settings has stopped..gnun din s touchpal x..

    pa help nmn pls...

    ReplyDelete
  43. hard reset ka po, kapag gannyang ang problema.

    ReplyDelete
    Replies
    1. pwde rjn po bang gawim yan sa window xp?.

      Delete
    2. Pwede sa XP. mas preferred ko nga ang XP eh.

      Delete
  44. sir how about ROOT for CM Flare Lite meron ba? please

    ReplyDelete
  45. john chris dela cruzMarch 26, 2015 at 2:42 AM

    sir na dl ko na lahat ng firmware at ung ibang dapat i-dl. dun sa part ng flashing, sa scatter-loading, anung file ung iseselect ko? .txt type kse ung needed na file

    ReplyDelete
  46. Sir iextract mo muna po yung naka part, pwede ka gumamit ng file joiner or 7zip yan kasi gamit ko.

    Pagoogle nalang po kung wala ka oa pangextract thanks.

    ReplyDelete
  47. sir pano po iextract meron na naman po akong 7zip

    ReplyDelete
  48. sir di po madetect ng computer ung flare lite ko

    ReplyDelete
  49. sa likod ng computer mo po isaksak.

    ReplyDelete
  50. boss iam back haha....bat ganun sir nawala na signal ko at invalid imei nkalgay? reflash ko ba ulit?

    ReplyDelete
  51. hard reset ka muna.

    pagganunparin

    eto updated guide, pahanap nalang yong for invalid imei
    http://firmwares2you.blogspot.com/2015/04/myphone-agua-hail-stock-romfirmware-to.html

    ReplyDelete
  52. Alin ang ayaw? Tested ko nayung sa mtkdroidstool magrestore IMEI.

    ReplyDelete
  53. ayos na po d ko pla nagawa ung root step thx again!

    ReplyDelete
  54. Ok no problem.

    ReplyDelete
  55. sir meron na po akin po rooted na po

    ReplyDelete
  56. paps, after following your instructions about privacy protection, my phone went on boot loop..any advice??

    ReplyDelete
  57. Thanks sa pag update ng comment mo po, makakatulong yan sa iba :)

    ReplyDelete
  58. Sir. Ayaw ma DL ng firmware files.?

    ReplyDelete
  59. Carlo Nafuar SarioApril 25, 2015 at 8:19 AM

    sir nagana po ba siya kahit naka root ung flare lite??

    ReplyDelete
  60. Carlo Nafuar SarioApril 25, 2015 at 8:39 AM

    ahh. cge po ita try ko na... :D binago ko lang po kasi yung bootanimation.zip tapos pag ka reboot may sinabi about system.ui

    ReplyDelete
  61. Carlo Nafuar SarioApril 25, 2015 at 2:10 PM

    sir pano po i extract yung mga firmware? help pls. :(

    ReplyDelete
  62. pano madl yung full dump rom kay langan talaga via downloader?

    ReplyDelete
  63. sana may sumagot :3

    ReplyDelete
  64. hindi po dapat iuncheck mo yong via downloader.

    ReplyDelete
  65. Sir nagana po ba to sa V3?

    ReplyDelete
  66. working sir salamat for this more power po haha :D

    ReplyDelete
  67. Ok thanks for the info. Makakatulong yan sa iba 😃

    ReplyDelete
  68. Rhey Victorio BelisarioMay 30, 2015 at 1:27 PM

    "BROM ERROR: S_FT_ENABLE_DRAM_FAIL (4032)
    [EMI] Enable DRAM Failed!
    [HINT]:
    Please check your load matches to your target which is to be downloaded"

    sir pano to???lageng ganyan please help me

    ReplyDelete
  69. Yoshimori ZumimoraJune 6, 2015 at 8:06 AM

    do the scatter file already included in file downloaded?

    ReplyDelete
  70. Yes, it is located inside the firmware folder ...

    ReplyDelete
  71. how can i install driver?

    ReplyDelete
  72. paano madownload ang mga frimware? :(
    sana po may sumagot.

    ReplyDelete
  73. paano madownload ang mga frimware

    ReplyDelete
  74. Sir help, ang problema lang ng flare lite ko ay "Privacy Protection Password" kaya ginawa ko yung instruction para sa problem na yun, nangyari pagkatapos ng flash, hang sa Kitkat Logo, sinubukan ko i-wipe factory/reset "no command" naman. sinubukan ko iflash hang parin sa kitkat logo at no command naman kapag iwa-wipe /reset. pano kaya to?

    ReplyDelete
  75. pa follow nalang guide ko sa post ko po. Sa bandang baba na kasi thanks.

    ReplyDelete
  76. phingi po roms for c2 sir tnx

    ReplyDelete
  77. required po ba e download yang Firmware from part 1 to part 4?

    ReplyDelete
  78. tapos? e extract ung apat ? ilalagay sa isang folder?

    ReplyDelete
  79. Magmi-merge yun at magigingisang file/folder.

    ReplyDelete
  80. d ko po mahanap ung scatter file,
    ni-run ko na ung apat(4) na firmware
    san ko po makikita ung scatter file??

    -salamat-

    ReplyDelete
  81. Naextract naman po? May error ba?

    Pag wala parin gamit ka 7zip po.

    ReplyDelete
  82. oo gamit ko po 7zip,

    katapos kong ma extract using 7zip, anu po next step?


    - hehe medyo mahina pa kasi knowledge ko dito, salamat po sa ung active replies - :) :) :)

    ReplyDelete
  83. Dapat may folder na lumabas na. Then install driver pagkatapos sa driver flashing kana.

    ReplyDelete
  84. 1st attempt - inisa-isa ko pag run ung 4 na firmware, walang nangyari.

    2nd attempt - sabay ko ni run ung 4, walang ding nangyari

    ReplyDelete
  85. eto po mga files na lumabas after ko pag extract using 7zip

    ReplyDelete
  86. awwwwww. cge re-redownload ko.

    ask ko lang, need paba e download ang MTK65xx VCOM Driver?

    Privacy protection password ung inaayos ko

    ReplyDelete
  87. pwede rin hindi, kailangan lang yon idownload kung magmanual install ka. Kasi minsan ayaw sa automatic install minsan.


    Opo maaayos yan sa pagflash sa flashtool. basta ang settings mo sa flashtool format+download

    ReplyDelete
  88. kung mag ma-manual install ako, yung preLoader naka check or uncheck?

    ReplyDelete
  89. Sir, magiging Android Lollipop na ba ang CM Flare Lite???

    ReplyDelete
  90. This comment has been removed by the author.

    ReplyDelete
  91. This comment has been removed by the author.

    ReplyDelete
  92. okay na sa flash pero nung inopen ko ung cm flare lite ko nag stuck sa may kitkat then nag flash ulit ako tapos nung inopen ko na ayaw na mag bukas...

    ReplyDelete
  93. hello sir pa help namn po.. enable dram failed?:-(

    ReplyDelete
  94. Salamat sa pag share ng stock rom at procedure!! nag success ako sa pag flash! feeling technician na tuloy ako.haha

    ReplyDelete
  95. Sir Firmware Naman poh ng Flare S3 Lite.. Stock kc sya s logo nia.. at nd dn gmgna ung wipe factory setting nia.... wipe cache ayw dn.. pls help me sir.. asap sir.... p pm namn po aq if ok lng kung matutulungan m aq.... rhayhan.zarate252@gmail.com thanks sir

    ReplyDelete
  96. working sakin flare lite q890,yung sa imei eto gwin nyo after mawala sa flashing
    1. type mo *#*#3646633#*#*
    2.then punta ka sa "Connecttivity" hanapin mo "CDS information" then "Radio Information"
    3.Select "phone 1"
    4. type mo AT+EGMR=1,7,"" ---inside ng quote lagay mo IMEI mo tapus "SEND AT COMMAND" done.
    5. Ganon din gawin mo sa "phone 2" type mo AT+EGMR=1,10,"" ---inside ng quote lagay mo IMEI mo tapus "SEND AT COMMAND" done.

    ReplyDelete
  97. Idol pa add naman sa fb pa help lang maayos tong flare ko ayaw bumukas e

    ReplyDelete
  98. bos hingi naman po firmware flare s3 lite.....

    ReplyDelete
  99. sir help nman po kapareha kame ng problema ni ryan zarate sir pa help nman po ito po email ko

    jhongnire@gmail.com sna po matulongan nyo kmi po...

    ReplyDelete
  100. sucessful flashing ko kaso same pa din privacy lock di natngal :(

    ReplyDelete
    Replies
    1. paki sundan po ng procedure para sa privacy protection...salamat.

      Delete
  101. tanung lang po lahat po ba yan kaylangan idownload anf flare files

    ReplyDelete
  102. guys tanong lang baka meron kaung alam pang ayos ng CHERRY MOBILE FLARE S3 LITE bootloop ako NO COMMAND pag ka upgrade ko lollipop nkakainis , salamat sa sasagot !

    ReplyDelete
    Replies
    1. wala pa ako file niyan sir eh, spreadtrum kasi SoC niyan, hirap iback up.

      Delete
    2. ganyan din sakin tae hindi ko mapagana sa PC ko

      Delete
  103. Sir pwd mgtanong pano ba mag extract ng file. Bkit wlang scatter file? San as part? Entry q lhat wla eh. Tnx poh

    ReplyDelete
  104. Dead boot hung prob q xa cm flare lite. Tnx po

    ReplyDelete
    Replies
    1. check mo po dinawnload mo. baka mali.yong part 1-3 150MB yong part 4 90MB nalang ata yan.

      -Admin John

      Delete
  105. 100Mb lg poh ung 1-2-3 ung part 4 7.24mob lg

    ReplyDelete
    Replies
    1. Ahh ok, pwede makita files mo? 7zip ba ginamit mo para maetract yung naka part na file?

      Delete
  106. Q890_CM_FLareLite.7z.0001

    Winrar poh d ma extract.

    ReplyDelete
  107. Sir yan n poh Nikita q na ung folder. He he he. Salamat xa tulong. God bless us.:)

    ReplyDelete
  108. hindi ko mainstall to ...

    VCOM Driver :( :(

    ReplyDelete
  109. saken hang logo ng cherry mobile flare s3 lite saken ayaw na mag bukas at ayaw na mag factory reset ung volume up + power ayaw na gumana nag black screen na sya sira na ba to wala ng fix ?

    ReplyDelete
    Replies
    1. pasensya na wala pa akong stock rom niyan...

      Delete
  110. sir wala paba firmware ni flare lite quad bootloop po kc phone ko...

    ReplyDelete
  111. Sir Pallan ... patulong namn (flare lite quad bootloop) pahingi naman Firmware. kong mayron na tagal nang bootloop phone...salamat...

    ReplyDelete
  112. guys tanong lang baka meron kaung alam pang ayos ng CHERRY MOBILE FLARE S3 LITE kc after ko iupgrade to lollipop di na sya gumana, paginopen ko lumalabas NO COMMAND. thanks po sa sasagot. sana matulungan nyo ko.

    ReplyDelete
    Replies
    1. Magrereflash ka na niyan... Meron na ako firmware kaya lang di ko pa naupload. Mabagal kasi internet ko ngayon eh

      Delete
  113. panong reflash po? cge po antayin ko po maupload yan mayos lng tong cp ko.

    ReplyDelete
    Replies
    1. Ok sige.. Pero di ko sure kung kelan..

      Bagal kasi ngayon ng internet.

      Delete
  114. pano po ung reflash? pahingi na lng po ng guide or process. sana po maaga nyo maiupload para di ko na dalhin sa service center.salamat

    ReplyDelete
  115. sir ask aq and need help.. gusto q po install twrp or cwm sa flare s3 lite 5.1 model h520.. pero kung volume up+power button q.. chinese po lumalabas na words.. anu po gaagwin q? thanks po

    ReplyDelete
  116. gud day sir.pede po kaya to sa flare lite 2?

    ReplyDelete
  117. sir . yung akin nag stock lang sa boot. yung logo ng android kitkat. tas d na magtuloy

    ReplyDelete
    Replies
    1. same sa akin stock lng sa boot logo lng din lumalabas ! how to fix ?

      Delete
    2. hard reset ka pagkatapos magflash.

      Delete
  118. bakit po gnun storage not match (3182)

    tnry ko na po lahat format with/without bootloader, format all+ download ayaw parin kht po memory test yan nalabas

    ReplyDelete
  119. good evening po. ask ko lang po sana kung ano problema ng phone ko. flare lite2 po. ayaw kc magtuloy sa on. ang lumalabas lang:flare lite2 tpos mawawala. at ung ilaw na lang sa baba ang nagbi blink. panu po kya to?

    ReplyDelete
  120. good evening po. ask ko lang po sana kung ano problema ng phone ko. flare lite2 po. ayaw kc magtuloy sa on. ang lumalabas lang:flare lite2 tpos mawawala. at ung ilaw na lang sa baba ang nagbi blink. panu po kya to?

    ReplyDelete
  121. Enter Password for Q890_CM_FlareLite... anu po ba password nito?

    ReplyDelete
  122. Pahingi nmn po ng link custom recovery ng CM flare lite Q890 tnx po

    ReplyDelete
  123. bakit po hindi ma extract yung downloaded ko na roms?

    ReplyDelete
  124. help po bakit ayaw mag flash sa laptop ko yung cm flare lite quad yung cm garnet ko gumagana naman

    ReplyDelete
    Replies
    1. Spreadtrum po kasi ang CPU ng flare lite quad kaya hindi mo yan mapaflash sa spflashtool.

      Delete
  125. mam maribel paano po ba i flash ang spreadtrum

    ReplyDelete

Pages