FIRMWARES2U

Just Another Gadget Blog

  •

    • Breaking

    Monday, July 7, 2014

    Home Cherry Mobile Cherry Mobile Sapphire Hard Reset tutorial Cherry Mobile Sapphire 2.0 Remove Pattern Lock, Hard Reset, Google Account, TMPA

    Cherry Mobile Sapphire 2.0 Remove Pattern Lock, Hard Reset, Google Account, TMPA


    Did you forgot your google account or you cannot enable the data connection so that you can enter your google account to your phone to recover your phone.

    In this tutorial we will remove the pattern lock of your phone (Sapphire). Just follow the instructions carefully so that you can fully restore your phone into its normal state.

    *** Note: I am not responsible for bricking your phone, files uploaded are proven tested to support Sapphire 2.0 and 1.0..

    "For Windows OS 64bit user's I am not sure if this tutorial will work, because there is an issue with Research Downloa. But I can guarantee that this will work in 32bit Windows OS"

    "TO ALL SAPPHIRE 2.0 USER'S, DO NOT PROCEED IF YOU DO NOT WANT TO RISK BRICKING YOUR PHONE. NO AVAILABLE ROM FOR 2.0 AS OF THE MOMENT. THIS IS ONLY THE ALTERNATIVE WAY TO REMOVE FORGOTTEN PATTERN LOCK, PASSWORD OR GMAIL ACCOUNT. BUT AS I'VE SAID I HAVE TRIED AND TESTED THIS FILE IN VERSION 2.0"

    Lets proceed. Download First the 3 files.
    Research Download ----> Here
    UserBlock ------> Here
    Spreadtrum Driver -------> Here
    Spreadtrum Driver for Windows 7 ---> Here 
    After downloading the files. Extract it in one folder. 
    1. Open Research Download
    2. Load Packet, it is the first button in Research Download, look for CM Sapphire userdata(firmwares2you.blogspot.com).pac file...
    3. Check the following below: ONLY THE THREE
    ✓FDL1
    ✓FDL2
    ✓UserData
    4. Click in Calibration Page or Back up page (newest version) in Research Download. And UnCHECK ALL
    5. Press OK, and Press Play Button.

    Check Picture for you reference






    To Connect your phone.
    1. Press the Play button in Research Download. You notice that it is waiting for your phone to establish a connection.
    2. Insert USB Cable while holding Volume UP or Down
    3. If you correctly installed the driver for spreadtrum chip, it should detect your phone and continue flashing/resetting your phone.

    I hope this tutorial helps. If you have any questions just drop a comment. Stay stuned for more tutorials.

     If you find this post useful. A simple thank you in the comment box will suffice. ;)
    Tags
    Share This
    Author Image

    About Admin

    By at
    Labels: , , ,

    68 comments:

    1. richardSeptember 9, 2014 at 8:15 AM

      after downloading research download and the other,how can i open the files if windows cant open this??

      ReplyDelete
    2. Maribel NuarinSeptember 9, 2014 at 11:14 AM

      you need to open research download first then you can load the .pac file...

      ReplyDelete
    3. Julian JearSeptember 9, 2014 at 1:43 PM

      panu po hard reset ng sapphire?? please help di po kasi nagoopen.after po ng cherry mobile na logo bigla na lang namamatay pero nakabukas pa naman ung power nya.

      ReplyDelete
    4. Maribel NuarinSeptember 9, 2014 at 1:51 PM

      hi po thanks for visiting my blog, follow mo lang po yang post, kailangan po kasi ng pc para ma reset ang phone niyo...

      ReplyDelete
    5. nessaSeptember 18, 2014 at 9:17 AM

      how will i know if its 1.0 or 2.0

      ?

      ReplyDelete
    6. Maribel NuarinSeptember 18, 2014 at 1:14 PM

      Usually if 2.0 is written at the back of your phone, somewhere in the IMEI of your phone. If no version is written it is usually version 1.0

      ReplyDelete
    7. conztantineSeptember 19, 2014 at 11:26 AM

      "windows couldnt find driver software for your device" pano to ? :(

      ReplyDelete
    8. Maribel NuarinSeptember 19, 2014 at 11:33 AM

      download mo lang po yong driver, dito po para sa MTK at SPD driver https://www.sendspace.com/file/i73y9k

      ReplyDelete
    9. Maribel NuarinSeptember 19, 2014 at 11:41 AM

      natry mo rin po ba yong driver dyan sa post ko?

      ReplyDelete
    10. conztantineSeptember 19, 2014 at 11:49 AM

      nadownload ko na po yung drivers.rar ano po sunod na gagawin ?

      ReplyDelete
    11. Maribel NuarinSeptember 19, 2014 at 11:50 AM

      extract at iinstall mo po... hanapin mo po yong SPD Driver...

      ReplyDelete
    12. conztantineSeptember 19, 2014 at 11:57 AM

      ano po sunod na gagawin na po? sorry po sa istorbo

      ReplyDelete
    13. Maribel NuarinSeptember 19, 2014 at 11:58 AM

      ok na ba yong driver? sa research download ka na...OK lang basta bilisan mo lang kasi nagugutom na ako hehehe...

      ReplyDelete
    14. conztantineSeptember 19, 2014 at 12:05 PM

      di pa din po eh. "windows couldnt find driver software for your device" pa din :( help please :(

      ReplyDelete
    15. Maribel NuarinSeptember 19, 2014 at 12:06 PM

      ano ang OS mo XP or windows 7? i manual mo kaya sa device manager...

      ReplyDelete
    16. conztantineSeptember 19, 2014 at 12:12 PM

      window vista po,

      ReplyDelete
    17. Maribel NuarinSeptember 19, 2014 at 12:18 PM

      alis na muna ako ah... hanap ka nalang muna ng spreadtrum driver para sa windows vista.. or itry mo yong mga driver doon sa nadownload mo kanina na driver lahat namana kasi nandoon na..

      ReplyDelete
    18. Xtian Clemente SanquiSeptember 28, 2014 at 12:53 PM

      ask ko lng po, sinundan ko nmn kaso bat na brick po ata. wala n nagpapakita na logo.

      ReplyDelete
    19. Maribel NuarinSeptember 28, 2014 at 6:19 PM

      anong version po yong phone ninyo? natry ko na kasi eto sa version 1 and version 2 eh.

      ReplyDelete
    20. Maribel NuarinOctober 5, 2014 at 1:43 PM

      Nagawa niyo na po yang nasa taas? Anong version po ang sapphire ninyo?

      ReplyDelete
    21. Franz Dicen UyOctober 5, 2014 at 1:54 PM

      slr....1.0 po...
      ginawa q na po ung nasa itaas na instruction...
      na try q kanina sa windows 7 install q muna ang drivers tapos ung instruction sa itaas...nd nya ma detect ang sapphire... *sigh*

      ReplyDelete
    22. Maribel NuarinOctober 5, 2014 at 1:57 PM

      Ahh maaaring driver problem po yan. Hirap kasi sa Windows 7 eh, nahihirapan kasi ako dyan mag install ng driver's. Kapag nadetect yan pwedeng magawa yan ng procedure na nakapost sa taas.

      ReplyDelete
    23. Franz Dicen UyOctober 5, 2014 at 1:59 PM

      sa windows 8 naman madetect nya ang sapphire pero wala sya nag a-appear sa research download... :(

      ReplyDelete
    24. Maribel NuarinOctober 5, 2014 at 2:01 PM

      Driver problem parin yan. Mabilis lang kasi magflash yan. Mas maganda sana sa windows XP.

      ReplyDelete
    25. Franz Dicen UyOctober 5, 2014 at 2:03 PM

      hahaha...tama...mas stable kasi pag windows xp....
      cge nalng po...salamat sa po help... :D
      nice blog...fast responce... :)

      ReplyDelete
    26. Maribel NuarinOctober 5, 2014 at 2:07 PM

      OK. try mo parin sa windows 7 mo. Windows XP kasi gamit ko eh. Try mo nalang yong driver na pinagreply ko sa taas. Baka sakaling gumana.

      OK basta nandito lang ako kung may kailangan ka pa. Kung kailangan mo ng firmware meron ako pang version 1 lang ha. Wala pa ako version 2.

      ReplyDelete
    27. Franz Dicen UyOctober 5, 2014 at 2:10 PM

      cge po...PUSO lng gagana ito... :D

      ReplyDelete
    28. Maribel NuarinOctober 5, 2014 at 2:12 PM

      Sige sige, hayaan mo at gagawa ako ng instruction para sa Windows 7, kung pano mag install ng Spreadtrum driver. Salamat din sa feedback para magawan ko ng blog post :)

      ReplyDelete
    29. aaaatOctober 17, 2014 at 2:30 AM

      ikoconnect po ba muna ung phone bago i press ung play??

      ReplyDelete
    30. Maribel NuarinOctober 17, 2014 at 9:58 AM

      Play button muna bago iconnect...

      ReplyDelete
    31. threshOctober 25, 2014 at 10:20 AM

      thanks it works

      ReplyDelete
    32. jeffOctober 27, 2014 at 1:24 PM

      hi poh
      tanung ko lng poh san ku poh makkuha FDL1 and 2. nd ku poh kc makuha.
      patulong aman poh.

      ReplyDelete
    33. Maribel NuarinOctober 27, 2014 at 4:42 PM

      dito po idownload mo nalang po itong userblock at iload mo po sa researchdownload https://www.sendspace.com/file/wnitlw

      ReplyDelete
    34. ocirNovember 1, 2014 at 8:13 PM

      working siya sa win7 press +/- volume sabay connect usb, tried and tested

      ReplyDelete
    35. Sec Donmcario Ocampo EncisoNovember 2, 2014 at 4:07 PM

      sci usb2serial driver need para san un?

      ReplyDelete
    36. Maribel NuarinNovember 2, 2014 at 4:18 PM

      para maconnect mo po yong phone mo sa pc at magconnect sa research download,

      I download mo po ito https://www.sendspace.com/file/vlrhl6

      ReplyDelete
    37. Sec Donmcario Ocampo EncisoNovember 2, 2014 at 4:23 PM

      meron n ko nyan kaso gnun padin..

      ReplyDelete
    38. Sec Donmcario Ocampo EncisoNovember 2, 2014 at 4:24 PM

      Windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might have installed a file that is signed incorrectly or damaged, or that might be malicious software from an unknown source. (Code 52)



      yan lumalbas..

      ReplyDelete
    39. Maribel NuarinNovember 2, 2014 at 4:31 PM

      ahh kailangan mo isiguro po ioff yong driver signing..Naka windows 7 ka po tama po ba?

      ReplyDelete
    40. Sec Donmcario Ocampo EncisoNovember 2, 2014 at 4:33 PM

      uu.. pano?

      ReplyDelete
    41. Maribel NuarinNovember 2, 2014 at 4:34 PM

      try mo po itong mga method dito sa ibang blog.
      https://www.raymond.cc/blog/loading-unsigned-drivers-in-windows-7-and-vista-64-bit-x64/

      ReplyDelete
    42. Sec Donmcario Ocampo EncisoNovember 2, 2014 at 4:37 PM

      d same padin

      ReplyDelete
    43. Maribel NuarinNovember 2, 2014 at 4:37 PM

      naka 64bit ka po ba o 32bit lang?

      ReplyDelete
    44. Sec Donmcario Ocampo EncisoNovember 2, 2014 at 4:38 PM

      64bit po

      ReplyDelete
    45. Maribel NuarinNovember 2, 2014 at 4:39 PM

      natry mo na po lahat ng limang method doon sa binigay ko na blog?

      ReplyDelete
    46. Sec Donmcario Ocampo EncisoNovember 2, 2014 at 4:41 PM

      d p eh...

      ReplyDelete
    47. Maribel NuarinNovember 2, 2014 at 4:43 PM

      itry mo ito pang64bit na driver din ito

      https://www.sendspace.com/file/1lg0zm


      try and try until you succeed :D



      last resort mo nalang yong itry sa ibang PC :D

      ReplyDelete
    48. Maribel NuarinNovember 2, 2014 at 5:08 PM

      salamat sa feedback sir ocir :)

      ReplyDelete
    49. jhuneNovember 3, 2014 at 12:40 AM

      patulong naman po paano ko po maaalis ung passcode ko nakalimutan ko po kasi ehh

      ReplyDelete
    50. Maribel NuarinNovember 3, 2014 at 6:42 AM

      sundan niyo lang po yan na procedure...kompleto na yan nandyan na lahat...kung may hindi kayo maintindihan dyan sa taas tanong niyo lang sasagutin ko.

      ReplyDelete
    51. aguinaldoNovember 6, 2014 at 2:28 PM

      checking baudrate lang ung laging nakalagay sa status tapos sa progress waiting lang sya

      ReplyDelete
    52. Maribel NuarinNovember 6, 2014 at 2:30 PM

      nainstall mo po ng maigi an driver? at ano po ang OS ninyo? screenshot din sana kung pwede :D

      ReplyDelete
    53. enzoJanuary 28, 2015 at 10:53 AM

      bakit ., ayaw ma detect ng cp ko ?
      \

      ReplyDelete
    54. John PallanJanuary 28, 2015 at 1:09 PM

      dapat po naka off ang CP, dapat din na nainstall ang driver, at dapat din 32bit ang OS mol

      ReplyDelete
    55. jedFebruary 1, 2015 at 11:27 AM

      sir di po nag wowork sa akin pwd video tutorial nalng po pra madali naming ma intindihan

      ReplyDelete
    56. John PallanFebruary 1, 2015 at 9:07 PM

      pasensya na po, wala kasi ako test unit ng ganyang phone ngayon, kaya hindi ako makakapagprovide ng video....

      ReplyDelete
    57. JOmarkFebruary 14, 2015 at 12:10 AM

      Hey guys i just did it.. thnx miss maribel ... i love you!!!!!!!!!!!!! just following your instruction !!!!!!!!!!!!! Good Reset!!!!

      ReplyDelete
    58. JOmarkFebruary 14, 2015 at 12:11 AM

      Pwede na ako matulog!!!!! Happy Hearts Day PO!!!!!

      ReplyDelete
    59. John PallanFebruary 14, 2015 at 7:38 AM

      thanks for the feedback :-)

      ReplyDelete
    60. Brian MagiliwFebruary 21, 2015 at 1:57 AM

      hahaha ang galing sabay mo lang i - press volume +/- tapos kabit mo usb kapag lumabas na passed ok na u cp mo hehehe thanks po

      ReplyDelete
    61. John PallanFebruary 21, 2015 at 8:04 AM

      Good at restore mo po ang mo :) Thanks sa feedback :)

      ReplyDelete
    62. Darvin Louie Prado CorralesJune 9, 2015 at 10:57 AM

      power! ang galing ay. thanks though :D

      ReplyDelete
    63. John PallanJune 9, 2015 at 2:37 PM

      Kili kili power! haahha, salamat sa feedback ;)

      ReplyDelete
    64. alfred clementeJuly 8, 2015 at 3:16 PM

      please help here!!

      i can't find the things you mention on step 3 would you please help me figure it out ! :D

      ReplyDelete
    65. UnknownDecember 21, 2015 at 6:37 PM

      paano po pag 1.0 yung version?

      ReplyDelete
    66. UnknownJanuary 3, 2016 at 2:49 PM

      maaayus pa po ba ung on off on off ung power nya pag kinoconnect sa pc?? :3

      ReplyDelete
    67. UnknownDecember 29, 2016 at 3:33 PM

      Thank you so much Miss Maribel Nuarin, It works for me 100%. I owe you my life. Cherry Mobile Sapphire V.2 with "forgot pin" issue. I Used win7 x32 since she recommend x32 than x64 bit system. Note: you need to install drivers first ( if this is your first time using flashing application) before running the RESEARCH DOWNLOAD application located inside BIN folder.

      ReplyDelete

    Subscribe to: Post Comments (Atom)

    Author Details

    Blogging on my free time.

    Pages

    Send Quick Message

    Name

    Email *

    Message *