Just Another Gadget Blog

Breaking

Monday, July 7, 2014

Cherry Mobile Sapphire 2.0 Remove Pattern Lock, Hard Reset, Google Account, TMPA


Did you forgot your google account or you cannot enable the data connection so that you can enter your google account to your phone to recover your phone.

In this tutorial we will remove the pattern lock of your phone (Sapphire). Just follow the instructions carefully so that you can fully restore your phone into its normal state.

*** Note: I am not responsible for bricking your phone, files uploaded are proven tested to support Sapphire 2.0 and 1.0..


"For Windows OS 64bit user's I am not sure if this tutorial will work, because there is an issue with Research Downloa. But I can guarantee that this will work in 32bit Windows OS"

"TO ALL SAPPHIRE 2.0 USER'S, DO NOT PROCEED IF YOU DO NOT WANT TO RISK BRICKING YOUR PHONE. NO AVAILABLE ROM FOR 2.0 AS OF THE MOMENT. THIS IS ONLY THE ALTERNATIVE WAY TO REMOVE FORGOTTEN PATTERN LOCK, PASSWORD OR GMAIL ACCOUNT. BUT AS I'VE SAID I HAVE TRIED AND TESTED THIS FILE IN VERSION 2.0"

Lets proceed. Download First the 3 files.
Research Download ----> Here
UserBlock ------> Here
Spreadtrum Driver -------> Here
Spreadtrum Driver for Windows 7 ---> Here 
After downloading the files. Extract it in one folder. 
1. Open Research Download
2. Load Packet, it is the first button in Research Download, look for CM Sapphire userdata(firmwares2you.blogspot.com).pac file...
3. Check the following below: ONLY THE THREE
FDL1
FDL2
UserData
4. Click in Calibration Page or Back up page (newest version) in Research Download. And UnCHECK ALL
5. Press OK, and Press Play Button.

Check Picture for you reference






To Connect your phone.
1. Press the Play button in Research Download. You notice that it is waiting for your phone to establish a connection.
2. Insert USB Cable while holding Volume UP or Down
3. If you correctly installed the driver for spreadtrum chip, it should detect your phone and continue flashing/resetting your phone.

I hope this tutorial helps. If you have any questions just drop a comment. Stay stuned for more tutorials.

If you find this post useful. A simple thank you in the comment box will suffice. ;)

68 comments:

  1. after downloading research download and the other,how can i open the files if windows cant open this??

    ReplyDelete
  2. you need to open research download first then you can load the .pac file...

    ReplyDelete
  3. panu po hard reset ng sapphire?? please help di po kasi nagoopen.after po ng cherry mobile na logo bigla na lang namamatay pero nakabukas pa naman ung power nya.

    ReplyDelete
  4. hi po thanks for visiting my blog, follow mo lang po yang post, kailangan po kasi ng pc para ma reset ang phone niyo...

    ReplyDelete
  5. how will i know if its 1.0 or 2.0

    ?

    ReplyDelete
  6. Usually if 2.0 is written at the back of your phone, somewhere in the IMEI of your phone. If no version is written it is usually version 1.0

    ReplyDelete
  7. "windows couldnt find driver software for your device" pano to ? :(

    ReplyDelete
  8. download mo lang po yong driver, dito po para sa MTK at SPD driver https://www.sendspace.com/file/i73y9k

    ReplyDelete
  9. natry mo rin po ba yong driver dyan sa post ko?

    ReplyDelete
  10. nadownload ko na po yung drivers.rar ano po sunod na gagawin ?

    ReplyDelete
  11. extract at iinstall mo po... hanapin mo po yong SPD Driver...

    ReplyDelete
  12. ano po sunod na gagawin na po? sorry po sa istorbo

    ReplyDelete
  13. ok na ba yong driver? sa research download ka na...OK lang basta bilisan mo lang kasi nagugutom na ako hehehe...

    ReplyDelete
  14. di pa din po eh. "windows couldnt find driver software for your device" pa din :( help please :(

    ReplyDelete
  15. ano ang OS mo XP or windows 7? i manual mo kaya sa device manager...

    ReplyDelete
  16. alis na muna ako ah... hanap ka nalang muna ng spreadtrum driver para sa windows vista.. or itry mo yong mga driver doon sa nadownload mo kanina na driver lahat namana kasi nandoon na..

    ReplyDelete
  17. ask ko lng po, sinundan ko nmn kaso bat na brick po ata. wala n nagpapakita na logo.

    ReplyDelete
  18. anong version po yong phone ninyo? natry ko na kasi eto sa version 1 and version 2 eh.

    ReplyDelete
  19. Nagawa niyo na po yang nasa taas? Anong version po ang sapphire ninyo?

    ReplyDelete
  20. slr....1.0 po...
    ginawa q na po ung nasa itaas na instruction...
    na try q kanina sa windows 7 install q muna ang drivers tapos ung instruction sa itaas...nd nya ma detect ang sapphire... *sigh*

    ReplyDelete
  21. Ahh maaaring driver problem po yan. Hirap kasi sa Windows 7 eh, nahihirapan kasi ako dyan mag install ng driver's. Kapag nadetect yan pwedeng magawa yan ng procedure na nakapost sa taas.

    ReplyDelete
  22. sa windows 8 naman madetect nya ang sapphire pero wala sya nag a-appear sa research download... :(

    ReplyDelete
  23. Driver problem parin yan. Mabilis lang kasi magflash yan. Mas maganda sana sa windows XP.

    ReplyDelete
  24. hahaha...tama...mas stable kasi pag windows xp....
    cge nalng po...salamat sa po help... :D
    nice blog...fast responce... :)

    ReplyDelete
  25. OK. try mo parin sa windows 7 mo. Windows XP kasi gamit ko eh. Try mo nalang yong driver na pinagreply ko sa taas. Baka sakaling gumana.

    OK basta nandito lang ako kung may kailangan ka pa. Kung kailangan mo ng firmware meron ako pang version 1 lang ha. Wala pa ako version 2.

    ReplyDelete
  26. cge po...PUSO lng gagana ito... :D

    ReplyDelete
  27. Sige sige, hayaan mo at gagawa ako ng instruction para sa Windows 7, kung pano mag install ng Spreadtrum driver. Salamat din sa feedback para magawan ko ng blog post :)

    ReplyDelete
  28. ikoconnect po ba muna ung phone bago i press ung play??

    ReplyDelete
  29. Play button muna bago iconnect...

    ReplyDelete
  30. hi poh
    tanung ko lng poh san ku poh makkuha FDL1 and 2. nd ku poh kc makuha.
    patulong aman poh.

    ReplyDelete
  31. dito po idownload mo nalang po itong userblock at iload mo po sa researchdownload https://www.sendspace.com/file/wnitlw

    ReplyDelete
  32. working siya sa win7 press +/- volume sabay connect usb, tried and tested

    ReplyDelete
  33. Sec Donmcario Ocampo EncisoNovember 2, 2014 at 4:07 PM

    sci usb2serial driver need para san un?

    ReplyDelete
  34. para maconnect mo po yong phone mo sa pc at magconnect sa research download,

    I download mo po ito https://www.sendspace.com/file/vlrhl6

    ReplyDelete
  35. Sec Donmcario Ocampo EncisoNovember 2, 2014 at 4:23 PM

    meron n ko nyan kaso gnun padin..

    ReplyDelete
  36. Sec Donmcario Ocampo EncisoNovember 2, 2014 at 4:24 PM

    Windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might have installed a file that is signed incorrectly or damaged, or that might be malicious software from an unknown source. (Code 52)



    yan lumalbas..

    ReplyDelete
  37. ahh kailangan mo isiguro po ioff yong driver signing..Naka windows 7 ka po tama po ba?

    ReplyDelete
  38. Sec Donmcario Ocampo EncisoNovember 2, 2014 at 4:33 PM

    uu.. pano?

    ReplyDelete
  39. try mo po itong mga method dito sa ibang blog.
    https://www.raymond.cc/blog/loading-unsigned-drivers-in-windows-7-and-vista-64-bit-x64/

    ReplyDelete
  40. Sec Donmcario Ocampo EncisoNovember 2, 2014 at 4:37 PM

    d same padin

    ReplyDelete
  41. naka 64bit ka po ba o 32bit lang?

    ReplyDelete
  42. Sec Donmcario Ocampo EncisoNovember 2, 2014 at 4:38 PM

    64bit po

    ReplyDelete
  43. natry mo na po lahat ng limang method doon sa binigay ko na blog?

    ReplyDelete
  44. Sec Donmcario Ocampo EncisoNovember 2, 2014 at 4:41 PM

    d p eh...

    ReplyDelete
  45. itry mo ito pang64bit na driver din ito

    https://www.sendspace.com/file/1lg0zm


    try and try until you succeed :D



    last resort mo nalang yong itry sa ibang PC :D

    ReplyDelete
  46. salamat sa feedback sir ocir :)

    ReplyDelete
  47. patulong naman po paano ko po maaalis ung passcode ko nakalimutan ko po kasi ehh

    ReplyDelete
  48. sundan niyo lang po yan na procedure...kompleto na yan nandyan na lahat...kung may hindi kayo maintindihan dyan sa taas tanong niyo lang sasagutin ko.

    ReplyDelete
  49. checking baudrate lang ung laging nakalagay sa status tapos sa progress waiting lang sya

    ReplyDelete
  50. nainstall mo po ng maigi an driver? at ano po ang OS ninyo? screenshot din sana kung pwede :D

    ReplyDelete
  51. bakit ., ayaw ma detect ng cp ko ?
    \

    ReplyDelete
  52. dapat po naka off ang CP, dapat din na nainstall ang driver, at dapat din 32bit ang OS mol

    ReplyDelete
  53. sir di po nag wowork sa akin pwd video tutorial nalng po pra madali naming ma intindihan

    ReplyDelete
  54. pasensya na po, wala kasi ako test unit ng ganyang phone ngayon, kaya hindi ako makakapagprovide ng video....

    ReplyDelete
  55. Hey guys i just did it.. thnx miss maribel ... i love you!!!!!!!!!!!!! just following your instruction !!!!!!!!!!!!! Good Reset!!!!

    ReplyDelete
  56. Pwede na ako matulog!!!!! Happy Hearts Day PO!!!!!

    ReplyDelete
  57. thanks for the feedback :-)

    ReplyDelete
  58. hahaha ang galing sabay mo lang i - press volume +/- tapos kabit mo usb kapag lumabas na passed ok na u cp mo hehehe thanks po

    ReplyDelete
  59. Good at restore mo po ang mo :) Thanks sa feedback :)

    ReplyDelete
  60. Darvin Louie Prado CorralesJune 9, 2015 at 10:57 AM

    power! ang galing ay. thanks though :D

    ReplyDelete
  61. Kili kili power! haahha, salamat sa feedback ;)

    ReplyDelete
  62. please help here!!

    i can't find the things you mention on step 3 would you please help me figure it out ! :D

    ReplyDelete
  63. maaayus pa po ba ung on off on off ung power nya pag kinoconnect sa pc?? :3

    ReplyDelete
  64. Thank you so much Miss Maribel Nuarin, It works for me 100%. I owe you my life. Cherry Mobile Sapphire V.2 with "forgot pin" issue. I Used win7 x32 since she recommend x32 than x64 bit system. Note: you need to install drivers first ( if this is your first time using flashing application) before running the RESEARCH DOWNLOAD application located inside BIN folder.

    ReplyDelete

Pages