Just Another Gadget Blog

Breaking

Sunday, November 30, 2014

SM-T210 Samsung Galaxy Tab 3 Wifi Firmware / stock rom to unbrick your device

Hey all, 


Im done uploading the firmware for SM-T210 or the Samsung Galaxy Tab 3 Wifi firmware / stock rom. I also included the pit file in case you need it.




You need to download several files including the firmware

Odin --> Odin 3.07
Firmware -- > T210XXAMKF_T210OXXAMK2 - 1.zip.001
Firmware --> Part 2
Firmware --> Part 3 
Firmware --> Part 4 
Firmware --> Part 5 
Firmware --> Part 6 
Firmware --> Part 7 
Firmware --> Part 8 
Firmware --> Part 9 
PIT file --> PIT File
Samsung Driver -- > SamsungDriver

"Extract these files in your desired folder"


 "Use 7zip to Extract all parts of the files"


You can fix the following issue:
  1. Bootloop
  2. Damaged SystemUI
  3. Forced Closing App (if hard reset is not possible)

 
Installing the driver

1. Install driver first just keep on hitting next.
2. After installing the driver Press and Hold VOLUME DOWN + Home Key + Power Button, a selection will appear if you would like to go in Download Mode, Press Volume Up to proceed in Download Mode.
3. Connect your phone in the PC via USB Cable
4. Wait for it to finish installing the driver.
"Note: Sometimes it is better to reboot your PC. After installing the driver."


BEFORE PROCEEDING IN FLASHING MAKE SURE  THAT THE BATTERY IS FULLY CHARGED OR 50% CHARGED.


Flashing your Device
1. Open Odin 3.07
2. Click in PIT and look for LT02.pit, click in PDA, and look for T210XXAMKF_T210OXXAMK2_T210XXAMKF_HOME.tar.md5.

PIT --> LT02.pit

PDA --> T210XXAMKF_T210OXXAMK2_T210XXAMKF_HOME.tar.md5.

Picture above is for reference only


3. Do not check repartition in option key, copy only what is shown in the picture above.
4. When you are ready to flash your phone, Press and Hold  VOLUME DOWN + Home Key + Power Button, a selection will appear if you would like to go in Download Mode, Press Volume Up to proceed in Download Mode.
5. Connect your phone in the PC via USB Cable, wait for a value in the ID:COM to appear. It will turn yellow with number example: COM32, if it nothing appear close Odin and open it again and load the file again.
6. Press START to proceed flashing your phone. Wait until it is done, the device will reboot after flashing.


I hope this tutorial help you. Drop a comment if there is something is not clear to you. Cheers! ^_^

Tested by:
Wieslaw Derkowski

12 comments:

  1. unable to extract firmware (using winrar) plz upload correct file.

    ReplyDelete
  2. use file joiner or 7zip, you can't extract it with winrar.

    ReplyDelete
  3. working great, thanks I save my tab:)

    ReplyDelete
  4. do i have to download all the files here?? or just thefirst one?
    im confused. sorry :)

    ReplyDelete
  5. extract 7zip not winzip not winrar..

    ReplyDelete
  6. extract 7zip only then after extract your file is T210XXAMKF_T210OXXAMK2_T210XXAMKF_HOME.tar.md5.

    ReplyDelete
  7. Installing the driver-> Step 2...
    This step is for the tab, right?

    ReplyDelete
  8. Could you re upload the files please? thanks!

    ReplyDelete
  9. OR does anyone still have them?

    ReplyDelete
  10. Thanks for sharing, nice post! Post really provice useful information!

    An Thái Sơn với website anthaison.vn chuyên sản phẩm máy đưa võng hay máy đưa võng tự động tốt cho bé là địa chỉ bán máy đưa võng giá rẻ tại TP.HCM và giúp bạn tìm máy đưa võng loại nào tốt nhất hiện nay.

    ReplyDelete

Pages